how to change battery in 2016 ford explorer key fob

Step-by-Step: Change Battery in 2016 Ford Explorer Key Fob

By Steven Allen
AD

If your 2016 Ford Explorer's key fob is acting up, it might be time for a fresh battery. Don't let a weak signal leave you locked out; follow this comprehensive guide to replace the battery in your 2016 Ford Explorer key fob with ease.

The process takes just a few minutes and requires minimal tools. Here's what you'll need and a step-by-step guide to get you back on the road in no time.

Preparation: Gather Tools and Replacement Battery

Before you begin, make sure you have the following items on hand:

AD
How to Replace A Ford Smart Key Battery - Expedition Edge Escape Explorer Remote Fob - Change Remove
How to Replace A Ford Smart Key Battery - Expedition Edge Escape Explorer Remote Fob - Change Remove
2013 - 2016 Ford Fusion Remote Key Fob Battery Change - How To Remove Replace Ranger Key Batteries
2013 - 2016 Ford Fusion Remote Key Fob Battery Change - How To Remove Replace Ranger Key Batteries
How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
How To Replace A 2018 - 2024 Ford Explorer Key Battery - Change Replacement Remote Fob Batteries
  • Replacement CR2032 battery - This type of battery is commonly used in key fobs and remote controls.
  • Package opener or flathead screwdriver - You'll need this to carefully pry off the key fob's casing.
  • Glutaraldehyde or isopropyl alcohol (optional) - These can help disinfect your hands and tools, ensuring a clean process.

Step 1: Identify the Battery Compartment

The battery compartment on your 2016 Ford Explorer key fob is located underneath the key ring. It's securely sealed with a metal tab for safety purposes.

To confirm you have the right battery, compare the old and new batteries. They should match in size and have the same positive and negative signs.

Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco
Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco
How To Replace or Change Ford Explorer Remote Key Fob Battery 2016 - 2017
How To Replace or Change Ford Explorer Remote Key Fob Battery 2016 - 2017

Step 2: Remove the Key Fob's Back Cover

Using your package opener or flathead screwdriver, insert it carefully into the small gap between the key fob's back cover and the main body. Apply gentle pressure and slowly work your way around the perimeter of the cover.

You should feel the locking tabs release one by one. Once all tabs are disengaged, carefully lift the back cover off to expose the internal components.

AD

Replace the Battery

With the back cover removed, you'll see the battery compartment with the old CR2032 battery inside. Before replacing it, ensure theophase (+) and (-) signs match between the old and new batteries to maintain proper polarity.

Step 3: Remove the Old Battery

Gently lift the old battery out of the compartment, making sure not to bend or damage the golden contacts located at the ends of the battery.

If the battery is stuck or difficult to remove, try using a pair of tweezers to grasp it more securely.

AD

Step 4: Insert the New Battery

Aim the positive end of the new battery (marked with a + sign) towards the positive terminal inside the battery compartment. Align the battery with the golden contacts and press it firmly into place.

Ensure the battery is correctly positioned and seated against the terminal for a secure connection. You may need to adjust the position slightly if the fob doesn't work immediately.

Reassemble the Key Fob

With the new battery installed, carefully align the back cover with the main body of the key fob, ensuring the locking tabs are facing the corresponding slots.

AD

Step 5: Reattach the Back Cover

Angle the back cover at about a 30-degree angle and press down firmly on one corner. As you press, you should hear the locking tabs pop back into place one by one.

Work your way around the perimeter of the cover, ensuring all tabs are securely engaged. Once all tabs are fastened, your key fob should be fully reassembled.

Step 6: Test the Key Fob

Press the lock and unlock buttons on your key fob to test its functionality. You should hear the corresponding chirps from your vehicle.

If the key fob is still unresponsive, double-check that the battery is correctly aligned and fully seated in the compartment. You may need to reopen the key fob and reinsert the battery.

Congratulations, you've successfully replaced the battery in your 2016 Ford Explorer key fob! Regular battery replacement will help maintain your key fob's performance and keep you driving with convenience and peace of mind. Should you encounter any further issues, don't hesitate to consult a professional locksmith or visit your local dealership for assistance.

AD