how to change battery in 2013 ford escape

Step-by-Step: Change Battery in 2013 Ford Escape

By Christopher Martin
AD

Changing the battery in a 2013 Ford Escape isn't as daunting as it might sound. With just a few tools and some patience, you can replace the battery and get back on the road. Here's a step-by-step guide to help you through the process.

Before you start, make sure you have the following tools and materials: a new battery with the correct specifications, a wrench, a ratchet set, a wheel lug wrench, a battery post cleaner tool, gloves, and safety glasses. Always remember to work in a well-ventilated area and never smoke or use open flames when working with batteries.

Locating the Battery and Preparing Your Escape

The battery in a 2013 Ford Escape is usually located on the driver's side of the vehicle, near the fender. It's a good idea to park your Escape on a level surface and engage the parking brake before you begin.

AD
How to change a battery the right way on a 2013 Ford Escape SE
How to change a battery the right way on a 2013 Ford Escape SE
Ford Escape (2013-2019) - New Battery Install
Ford Escape (2013-2019) - New Battery Install
Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco
Ford Key FOB Remote Battery Change - F150, Explorer, Ranger, Escape, Bronco

Under the hood, locate the negative battery cable first, as it's easier to handle and you want to ground yourself to avoid static shock. Using your wrench, loosen and remove the nut holding the negative cable onto the battery post. Once the nut is loose, slide the cable off the post and place it to the side.

Removing the Battery Tray

The battery in a 2013 Ford Escape sits in a tray that's held down by two bolts. Use your ratchet set to remove these bolts, and then carefully lift the tray out of the engine compartment. You might need to wiggle it a bit to get it out.

2017 FORD ESCAPE TPMS RESET PROCEDURE (EASY & FAST)
2017 FORD ESCAPE TPMS RESET PROCEDURE (EASY & FAST)
2009 Ford Escape Hybrid battery charging - Not Starting
2009 Ford Escape Hybrid battery charging - Not Starting

Some bolts might be a bit rusty or tight. If you're having trouble, you can use a penetrating oil like WD-40 to loosen them up. Always be careful when using tools to avoid damaging the tray or other components.

Removing the Old Battery

With the tray removed, you can now lift out the old battery. If there's any corrosion around the battery posts, use your battery post cleaner tool to clean it off. This will ensure a good connection for your new battery.

AD

Once the posts are clean, you can discard the old battery according to your local waste management guidelines. Many auto parts stores and home improvement centers accept old batteries for recycling.

Installing the New Battery

Now that you have the old battery out, it's time to put in the new one. Ensure the new battery is clean and dry before installing it. Then, place it in the tray with the positive and negative terminals facing the correct directions (usually outlined in the battery's instructions or your vehicle's manual).

With the battery in place, you can reattach the battery tray and tighten the bolts using your ratchet set. Tighten them securely but be careful not to overtighten, as this can strip the bolts.

AD

Reconnecting the Battery Cables

Before attaching the battery cables, ensure the battery terminals are clean. Using your wrench, attach the negative battery cable first, sliding it onto the negative battery post. Tighten the nut securely.

Next, attach the positive battery cable to the positive battery post. Again, tighten the nut securely. Always remember "Red to Positive, Black to Negative" when connecting battery cables.

Testing the New Battery

After you've reconnected the battery cables, you can turn the ignition to the "On" position without starting the engine to check if the new battery is working. If all is well, you should see the dashboard lights illuminate.

AD

Also, it's a good idea to check your Escape's computer and infotainment system to ensure they're working properly. If they're not, there might be a holds in place afterward for a few minutes to condition the battery and ensure a proper electrical connection.

There you have it. Changing the battery in a 2013 Ford Escape isn't as complicated as you might have thought. Now that you've replaced the battery, remember to take your Escape for a test drive to ensure everything is working properly. And if you have any questions or concerns, don't hesitate to consult your vehicle's manual or contact a professional mechanic. Happy driving!

AD