how to change ariens snowblower belt

How to Change Ariens Snowblower Belt

By Jessica Miller
AD

It's that time of year again - the snow starts to fall, and your Ariens snowblower is your trusty sidekick for clearing your driveway. But wait, you notice that it's not performing as well as it used to. It could be that your snowblower's belt needs replacing. Don't worry; we've got you covered with this step-by-step guide on how to change your Ariens snowblower belt.

Before we dive in, let's touch on why this task is crucial. A faulty snowblower belt can lead to inefficient snow clearance, increased wear and tear on the engine, and even damage to your snowblower. So, it's paramount to know how to identify a bad belt and replace it in time.

The Right Belt for Your Ariens Snowblower

First things first, you need to ensure you're using the correct belt for your Ariens snowblower. Ariens offers several snowblower models, and each might require a slightly different belt. Check your machine's owner's manual or look for a model number on the belt itself to ensure you purchase the right one.

AD
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How to Change a Snowblower Belt Step-by-Step Guide for Beginners
How To Change AUGER & DRIVE BELTS On An Ariens Deluxe 24 Snowblower (Step-by-Step)
How To Change AUGER & DRIVE BELTS On An Ariens Deluxe 24 Snowblower (Step-by-Step)
How to Change Snow Blower Belts | Ariens®
How to Change Snow Blower Belts | Ariens®

Here are some common Ariens snowblower belts you might need:

  • 420473750 - Ariens 920065, 920016, 920036, 920046, 920056, 920066
  • 420474849 - Ariens 920076, 920086, 920166, 920186, 920206, 920226
  • 420473760 - Ariens 920026, 920088, 920148, 920168

Ensure you select the belt that corresponds to your snowblower model. Once you have the right belt, let's move on to the belt replacement process.

How to Change a Belt on a Snow Blower
How to Change a Belt on a Snow Blower
How to replace a snowblower auger belt | Repair guide
How to replace a snowblower auger belt | Repair guide

identificating a Bad Belt

Before you start the replacement process, you need to determine if your current belt is indeed faulty. Some signs of a bad belt include:

  • Cracking or fraying on the belt's surface
  • Glazing or sharkskin appearance on the belt's surface
  • Squealing or grinding noises coming from the snowblower
  • Decreased snowblowing performance

If you observe any of these signs, it's time to replace your Ariens snowblower belt.

AD

Before You Begin: Safety First

Safety should always be your top priority when working on your snowblower. Before you start, disconnect the spark plug wire to prevent the engine from starting accidentally. Also, ensure the snowblower is on a flat surface and the engine is completely cooled down.

Now, let's dive into the step-by-step guide on how to change your Ariens snowblower belt.

Removing the Old Belt

First, you need to access the belts. To do this, prop up the hood of your Ariens snowblower. You can use a piece of wood or a block to keep it raised.

AD

Next, locate the belt tension adjuster on the top of the engine. Using a ratchet or socket wrench, turn the adjuster clockwise to loosen the tension on the belts. Once the tension is released, you should be able to rotate the impeller ( Located on the discharges side of the machine) by hand with ease.

Removing the Drive Belt

Start by removing the drive belt that runs from the engine to the impeller. You can do this by slipping the belt over the pulleys. If the belt is worn out, it might break while removing it. Be cautious and wear appropriate safety gear.

Once the drive belt is removed, you can clean the pulleys. Any debris or old belt residue can negatively impact the performance of the new belt. Use a wire brush or a scraper to clean the pulleys thoroughly.

AD

Removing the Auger Belt

Next, remove the auger belt that runs from the auger pulley on the front of the snowblower to the auger belt pulley on the discharge side. Again, be cautious while removing the belt, as it might break.

Once both belts are removed, you're ready to install the new ones.

Installing the New Belt

Start by installing the drive belt. Route the new belt over the pulleys, ensuring it fits correctly and securely. Once the drive belt is in place, repeat the process with the auger belt.

After installing both belts, ensure they are properly tensioned. To do this, rotate the impeller by hand to check that the belts do not slip on the pulleys. If they do, you might need to adjust the belt tensioner.

Tensioning the Belts

To tension the belts properly, you'll need to use a belt tension gauge. These gauges are specifically designed to provide the correct tension for your Ariens snowblower belts. Here's how to use it:

  1. Route the tension gauge between the belt and the pulley.
  2. Press the gauge against the belt with steady pressure.
  3. Read the gauge. If the readings are within the acceptable range, the belt is properly tensioned. If not, you'll need to adjust the belt tensioner accordingly.

Once both belts are properly tensioned, double-check that they are securely fitted on the pulleys and the hood can be closed without any issues.

Reinstalling the Spark Plug Wire

Now that you've successfully replaced and tensioned your Ariens snowblower belts, it's time to reinstall the spark plug wire. Do this by reconnecting the wire to the spark plug.

Your snowblower is now ready to tackle the next snowfall.

Regular maintenance, including checking and replacing belts when necessary, will ensure your Ariens snowblower serves you well for many seasons to come. So, the next time the snow starts to fall, you can rest assured knowing your snowblower is in top shape. Happy snowblowing!

AD