how to change a brake light bulb on a ford fiesta 2016

How to Change Brake Light Bulb on a 2016 Ford Fiesta

By Andrew Lee
AD

Ever found yourself with a busted brake light on your Ford Fiesta 2016, leaving you with that nagging taillight indicator? Fear not, replacing the brake light bulb is an easy and rewarding task you can undertake in your driveway. In this guide, we'll walk you through the simple steps to change a brake light bulb on your Ford Fiesta 2016, ensuring you're back on the road safely in no time.

Before we dive into the process, gather your tools. You'll need a socket wrench, a metric socket set (10 mm), a flathead screwdriver, and your new brake light bulb (we recommend Philips' Xenon X-tremeVision or OSRAM's Night Breaker Laser).

Accessing the Brake Light Bulb

First, locate the fused relay box on your Fiesta. It's situated under the hood, on the driver's side, behind the engine air filter. You'll see two black clips holding it in place.

AD
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
How To Change A Brake Light Bulb – Storables
How To Change A Brake Light Bulb – Storables
3 Simple Steps to Fix Your Brake Light Today | Ford Fiesta mk6
3 Simple Steps to Fix Your Brake Light Today | Ford Fiesta mk6

Using your flathead screwdriver, carefully pry open the clips and pull the box out. This will expose the brake light fuse, which you should pull out for safety purposes. Now, it's time to get your hands dirty, metaphorically speaking, as we access the brake light bulb itself.

Removing the Bulb Cover

Open your car's trunk and locate the rear liftgate trim panel in the center, marked with a ' prise ' symbol. Push in the panel while simultaneously pulling it upward to remove it. Set it aside in a safe place.

a gloved hand adjusting the light switch on a wall
a gloved hand adjusting the light switch on a wall
Change a Brake Light
Change a Brake Light

Underneath, you'll find a black plastic cover secured by three 10 mm bolts. Use your socket wrench and metric socket set to remove these bolts. Lift the bulb cover outwards, exposing the brake light bulb, which is held in place by a retaining ring.

Removing the Old Bulb

Before touching the bulb, ensure your hands are clean to prevent damage from oils and grease. Gently pull out the rubber cover from the back of the bulb socket. Now, using your socket wrench and a 10 mm socket, loosen and remove the retaining ring.

AD

Grab the bulb by its base, not the glass, and turn it counterclockwise to unscrew and remove it from the bulb socket. Place the old bulb in a safe, secure spot; you might need to reuse it for the other side.

Installing the New Brake Light Bulb

With the old bulb removed, take your new brake light bulb and align it with the socket. Ensure the slots on the bulb enroll with the tabs inside the socket. Push the bulb gently into the socket, turning clockwise until it's snug but not overtightened.

Replace the retaining ring, securing it with your finger held straight. It's crucial not to overtighten, as this could cause the bulb to leak or break. Slip the rubber cover back over the socket, protecting it from dust and debris.

AD

Reassembly

Replace and reattach the brake light bulb cover using the 10 mm bolts. Secure the cover firmly but avoid overtightening.

Push the liftgate trim panel back into place, ensuring it clicks securely. Reinsert the fuse and push the fused relay box back into place, securing it with the two black clips.

Before you hit the road, test your new brake light bulb by turning on your car's hazard lights. If everything's working correctly, you'll see the brake lights illuminate. If not, double-check your work, ensuring you've tightened, aligned, and connected everything correctly. Now, you're ready to cruise the roads with confidence, knowing your Ford Fiesta 2016's brake lights are working perfectly.

AD
AD