How to Calibrate Samsung Top Load Washer
Is your Samsung top load washer not performing as it once was? Don't rush to replace it just yet. Calibration might be all it needs to get back to its spinning self. Here's a step-by-step guide to help you calibrate your Samsung top load washer, ensuring it works efficiently and safely for years to come.
Calibrating your washer may seem daunting, but Samsung has made it relatively simple. It involves stabilizing the washer, checking the suspension rods, and leveling the washer itself. Let's dive into these processes, ensuring your washer is spinning like new in no time.
Preparation and Initial Checks
Before we start, there are a few initial checks to ensure your washer is in good condition. First, confirm that your washer is truly unbalanced. If it's wobbling during the spin cycle, it might need calibration. Next, ensure there are no loose objects or large articles of clothing in the washer that could cause it to wobble.
Finally, check if the washer is properly mounted and level. If it's not, it could cause imbalances and require frequent calibration.
Stabilizing the Washer
If your washer is not level, it can cause it to wobble and vacuum during the spin cycle. To level it, you'll need to adjust the feet. Here's how:
- First, find the adjustment bolts under the front of the washer. They're usually covered by a panel that you can remove.
- Using a socket wrench, turn the bolts clockwise to raise the washer or counterclockwise to lower it. Do this gradually on both sides until the washer is level.
Checking the Suspension Rods
Suspension rods can become loose over time, causing the washer to wobble. Here's how to check and tighten them:
- Remove the front panel of the washer to access the suspension rods. Consult your washer's manual if you're unsure how to do this.
- Locate the suspension rods and check if they're securely fastened. If they're loose, tighten them with a socket wrench.
Calibrating the Washer
Now that we've checked the basics, let's dive into calibrating your washer. This process involves running a special spin cycle to help the washer balance itself.
To begin, clear any residual water and detergent from the washer. Next, place a set of old blankets or a rubber balance ring (if you have one) in the washer. These will help the washer balance evenly during the calibration cycle.
Running the Self-Diagnosis Cycle
The self-diagnosis cycle is built into your Samsung washer. To run it:
- Press and hold the 'Start/Pause' button for 3 seconds until the display shows 'Sel Diag'. This stands for 'Self Diagnosis'.
- Then press the 'D Cycle' or 'Delicates' button. The washer will start running a spin cycle. It may take a few minutes, and you might hear some unusual noises. This is normal.
Completing the Calibration
Once the self-diagnosis cycle is complete, the washer should have automatically calibrated itself. If you hear a beep, this indicates that the calibration was successful. If not, you might need to repeat the process or seek professional help.
To confirm that the calibration was successful, run a normal cycle with a load of clothes. If the washer no longer wobbles or makes unusual noises, great! Your Samsung top load washer is as good as new.
Regular maintenance is key to keeping your Samsung top load washer in top shape. Calibration is just one part of this process. Learning to interpret error codes, checking the water supply, and looking after the machine's components will ensure your washer gives you trouble-free service for many years to come. Now that you know how to calibrate your Samsung top load washer, you're well on your way to becoming a washing machine whisperer.