how to calibrate a samsung top load washer

How to Calibrate a Samsung Top Load Washer

By Richard Brown
AD

Keeping your Samsung top load washer in optimal condition is not just about regular cleaning, but also about proper calibration. Calibrating your washer ensures it performs at its best, uses resources efficiently, and prolongs its lifespan. So, let's dive into how to calibrate a Samsung top load washer and keep wash cycles smooth and effective.

Before we start, ensure your washer is unplugged from the power source for safety. Also, have a Phillips screwdriver and possibly a small flathead screwdriver ready, as we'll be dealing with some screws and panels. Now, let's get started with the calibration process.

Calibrating the Water Level

Calibrating the water level ensures your washer optimizes water usage and provides the best rinse. Here's how to do it:

AD
a hand is touching the top of an appliance
a hand is touching the top of an appliance
How to Calibrate a Top-Load Washer
How to Calibrate a Top-Load Washer
Samsung Top Loader Filter Location Guide
Samsung Top Loader Filter Location Guide

1. **Locate the Water Level Control Knob**: Underneath your washer, you'll find a panel with a water level control knob. It usually looks like a tube with different water level settings.

2. **Adjust the Knob**: Spin the knob counter-clockwise until you hear a click or the marker on the outer ring aligns with the '1' position. This ensures the washer is set to the minimum water level.

Samsung Top Load Washer Off Balance FIX DIY How to Replace Suspension Rods DC97-16350C
Samsung Top Load Washer Off Balance FIX DIY How to Replace Suspension Rods DC97-16350C
a person is opening the lid of a washing machine to remove it from its box
a person is opening the lid of a washing machine to remove it from its box

Testing the Water Level Calibration

Once you've adjusted the water level, it's crucial to test the calibration. Here's how:

1. **Run a Cycle**: Plug in your washer and run a normal cycle with a small load (about 3-4 pounds of laundry).

AD

2. **Inspect Post-Cycle**: After the cycle, check the water level in the tub. It should be about halfway up the load. If the level is too high or low, you may need to recalibrate.

Calibrating the Balancers

Improperly balanced washer tubs can lead to vibration and Manoa errors. Here's how to balance the tub:

1. **Find the Balance Holes**: Look underneath your washer and locate the balance holes. These are usually covered with a rubber grommet or plug.

AD

2. **Add or Remove Weights**: Depending on the manufacturer's instructions, you may need to add or remove weights from these holes to balance the tub. Samsung washer tubs use either a hollow or solid brass weight.

Testing the Balance Calibration

After calibrating the balance weights, you should test the washer to ensure it's running smoothly. Here's how:

1. **Run a Spin Cycle**: Plug in your washer and run a spin cycle with a full load.

AD

2. **Check for Vibration**: During and after the spin cycle, listen and observe the washer. There should be minimal vibration. If the washer still vibrates excessively, you may need to recalibrate the balance.

Congratulations! You've now learned how to calibrate a Samsung top load washer. Regular calibration helps maintain your washer's efficiency and longevity. Always remember to unplug your washer before starting any maintenance work and to use appropriate safety measures. Happy calibrating!

AD