How to Backwash a Hayward Pool Filter: Step-by-Step Guide
Keeping your pool's Hayward filter in optimal condition is crucial for maintaining clean, clear water. One essential maintenance task is backwashing the filter regularly. But what exactly is backwashing, and how do you do it? Let's dive in and learn how to effectively backwash a Hayward pool filter.
Backwashing is a process that reverses the flow of water through your filter, flushing out dirt and debris that has accumulated. This not only helps maintain the filter's efficiency but also extends its lifespan. For Hayward pool filters, backwashing is typically needed every 6 to 8 weeks, or whenever the pressure gauge shows a 8-10 psi increase from its baseline.
Preparing for Backwashing
Before you start, ensure you have the following items: a garden hose, a hose adapter (if not already attached), and a pair of flip flops (for comfort).
Also, it's a good idea to have a bucket and manual vacuum for cleaning the filter later. Now, let's look at the steps involved in backwashing a Hayward pool filter.
Initial Steps
Position the hose adapter on your filter Multiport valve. Attach one end of your garden hose to the adapter, and the other end to a water source.
Notice the position of the Multiport valve. It should currently be on 'Filter' or 'Backwash' (depending on your model). Make sure the pool pump is turned off and the multiport handle is set to 'Backwash'.
Starting the Backwash
Open the air relief valve at the top of your filter to release any trapped air. This step is vital for proper backwashing and pressure equalization.
Now, turn on the pool pump. You should see water flowing from the backwash line into the pool. Continue this process for approximately 2 to 3 minutes.
Rinsing and Cleaning
After backwashing, it's important to rinse the filter to remove any remaining debris. This also helps prevent contamination of the pool water.
First, switch the Multiport valve to 'Rinse'. Continue running the pump for another 1 to 2 minutes.
Rinsing the Filter
Next, turn off the pump and switch the valve to 'Filter'. Open the air relief valve to release any remaining air.
Now, turn the pump back on. The system should now filter the pool water as normal. Once the pressure stabilizes, close the air relief valve.
Cleaning the Filter Internally
With the pump off and the Multiport valve on 'Filter', open the filter tank screw-on ring. Inside, you'll find the filter cartridges. Remove and clean them following your Hayward filter's specific instructions.
After cleaning, return the cartridges to their position and reassemble the filter. Turn the pump back on and monitor the filter pressure to ensure it's working correctly.
Regular backwashing and filter cleaning will keep your Hayward pool filter in top shape, ensuring a healthy, clean swimming experience. Always remember to prioritize safety and maintain a regular cleaning schedule. Happy swimming!