how to adjust a larson storm door

How to Adjust a Larson Storm Door

By Thomas Rodriguez
AD

Is your Larson storm door giving you trouble? Are you experiencing difficulty in adjusting it to fit your entrance perfectly? You're not alone. Many homeowners face this common issue, but don't worry, with the right steps, you can easily solve this problem. Let's dive in and learn how to adjust a Larson storm door to suit your needs.

Before we proceed, it's crucial to understand that adjusting a storm door primarily involves modifying the strike plate or the adjustable saddle. It's a simple task that requires basic tools and a bit of patience. Grab your screwdriver and let's get started!

Adjusting the Strike Plate

The strike plate is the base that holds the door's latch. If your door is too tight or too loose, adjusting the strike plate can help.

AD
Make Your House Warmer by Adjusting the Storm Door Sweep
Make Your House Warmer by Adjusting the Storm Door Sweep
Make Your House Warmer by Adjusting the Storm Door Sweep
Make Your House Warmer by Adjusting the Storm Door Sweep
a white door with a yellow window in it
a white door with a yellow window in it

To adjust the strike plate, follow these steps:

Loosening the Screws

Begin by removing the screws that secure the strike plate to the door jamb. You may need a Phillips or flathead screwdriver, depending on the type of screws.

How-to Install a QuickFit Handle set on a LARSON door
How-to Install a QuickFit Handle set on a LARSON door
How to Change a Screen Door to a Glass Storm Door
How to Change a Screen Door to a Glass Storm Door

Start with the screws at the top and then move down. Loosen them just enough to allow the strike plate to move. Do not remove them completely at this stage.

Sliding the Strike Plate

Once the screws are loose, you can slide the strike plate up or down to adjust the door's fit. If the door is too tight, slide the strike plate down. If it's too loose, slide it up.

AD

After you've found the perfect fit, tighten the screws to hold the strike plate in place. Test the door to ensure it opens and closes smoothly.

Adjusting the Saddle

If adjusting the strike plate doesn't solve your problem, you might need to adjust the saddle. The saddle is the part that holds the door's frame to the hinge. Larson storm doors come with an adjustable saddle to ensure a perfect fit.

To adjust the saddle, follow these steps:

AD

Locating the Saddle

The saddle is usually found at the top of the door's frame. It's a small metal piece with an adjusting screw.

Using a screwdriver, loosen the adjusting screw a quarter turn at a time. As you loosen it, the door will move slightly. Be careful not to turn it too much at once.

Adjusting the Door's Fit

To make the door fit tighter, loosen the screw until the door opens and closes smoothly. To make the door fit looser, turn the screw clockwise.

AD

After you've made the adjustment, test the door to ensure it opens and closes correctly. If you need to, make further adjustments until you've achieved the perfect fit.

Preventive Maintenance

Adjusting the strike plate and saddle should keep your Larson storm door fitting perfectly. However, regular maintenance can prevent future issues and ensure your door works efficiently for years to come.

Always check your door regularly for any signs of wear and tear. Tighten loose screws and lubricate moving parts with a few drops of oil. This will keep your door working smoothly and prevent costly repairs down the line.

There you have it! With these steps, you should now be able to adjust your Larson storm door to fit your entrance perfectly. Always remember to test your door after each adjustment to ensure it's working correctly. Happy DIY-ing!

AD