ryobi trimmer how to replace line

Easy Ryobi Trimmer Line Replacement: Step-by-Step Guide

By Rachel Young
AD

Are you the proud owner of a Ryobi trimmer and faced with the task of replacing its line? You're in the right place. While it might seem daunting, replacing the line on your Ryobi trimmer is a straightforward task that requires minimal tools and can extend the life of your trimmer. Let's get started!

Before we dive into the steps, ensure you have the correct replacement line for your specific Ryobi trimmer model. The user manual or the line packaging should provide the necessary information. Safety first, turn off and unplug your trimmer before beginning any maintenance or replacement tasks.

Understanding Your Ryobi Trimmer's Line Type

Your first step is to identify which line type your Ryobi trimmer uses. Ryobi offers both single-line and dual-line trimmers. Knowing the difference will help you purchase the correct replacement line.

AD
How to Replace Ryobi Electric Trimmer String Line
How to Replace Ryobi Electric Trimmer String Line
Ryobi Expand It 40V Electric String Trimmer Line Replacement
Ryobi Expand It 40V Electric String Trimmer Line Replacement
a man using a lawn mower to cut grass
a man using a lawn mower to cut grass

Single-line trimmers use one string to cut vegetation, while dual-line trimmers use two strings. Both line types are effective, but they cater to different needs. Single-line trimmers are great for precise trimming and are lighter in weight, while dual-line trimmers offer more power and are ideal for heavier cutting jobs.

Identifying Your Ryobi Trimmer's Line Type

To identify your trimmer's line type, look for the spool at the bottom of your trimmer's shaft. If there's a single hole with one string feeding through it, your trimmer is a single-line model. If there are two holes with two strings feeding through them, you have a dual-line trimmer.

Ryobi 40v String Trimmer Line Replacement
Ryobi 40v String Trimmer Line Replacement
HOW TO REPLACE Fuel Line & Filter on 2 Cycle Ryobi Grass Trimmer
HOW TO REPLACE Fuel Line & Filter on 2 Cycle Ryobi Grass Trimmer

Ryobi trimmers also use either round or tetroon (square) line. Round line is more common and works well for most trimming tasks. Tetroon line, on the other hand, is stronger and designed to handle heavy-duty cutting jobs. It's important to match the line type when replacing, as the different shapes can only be used in the corresponding trimmer.

Determining the Correct Line Size

Once you've identified your line type, the next step is to determine the correct line size. Ryobi trimmers use various line sizes, typically ranging from 0.065 to 0.155 inches in diameter. Check your user manual or the current line's packaging to find the correct size for your trimmer.

AD

When choosing a line size, consider your cutting needs. Thinner lines are better for lighter cutting jobs and can last longer, while thicker lines are more durable and can handle heavier work but may need to be replaced more frequently.

Replacing the Line on Your Ryobi Trimmer

Now that you have the correct replacement line, it's time to replace the old one. The process varies slightly between single-line and dual-line trimmers, so we'll cover each type separately.

Regardless of your trimmer type, you'll need a pair of scissors or a line cutter, and a small flathead screwdriver to help you with the spool. Always ensure your trimmer is turned off and unplugged before beginning any maintenance or replacement tasks to prevent accidents.

AD

Replacing the Line on a Single-Line Ryobi Trimmer

First, release the trimmer head guarding the spool by lifting the tab located on the side of the head. This should expose the spool. Using your flathead screwdriver, carefully pry the spool cover off by turning it counterclockwise.

Now that you have access to the spool, cut the old line using scissors or a line cutter, leaving a few inches of line sticking out of the spool. Roll the line back onto the spool, making sure to keep the line side with the hole facing out. Measure out approximately 10 to 27 feet of new line (the length depends on your trimmer model) and feed it through the hole in the spool.

Replacing the Line on a Dual-Line Ryobi Trimmer

To access the spool on a dual-line trimmer, you'll need to remove the spool cover. Start by releasing the spool lock by pushing down on the button located on the top of the spool. This should allow you to turn the spool counterclockwise, releasing the cover.

AD

Remove the old line by cutting it at the point where it exits the spool and pulling it out. You should now have two holes exposed. Measure out approximately 20 to 40 feet of new line (the length depends on your trimmer model) and cut it in half. Feed each half through the corresponding hole in the spool.

Reassemble your trimmer, ensure the line is properly secured, and test your new line to make sure it's working correctly. With your trimmer's new line in place, you're ready to conquer those overgrown weeds and maintain a well-trimmed lawn.

AD