How to Install a Keurig Water Filter: Step-by-Step Guide
If you're a coffee enthusiast who swears by your Keurig brewer, you're likely invested in maintaining its optimal performance. One crucial aspect of keeping your machine in prime condition is understanding how to install and use the Keurig water filter. This not only enhances the taste of your coffee but also prolongs the life of your brewer. Let's delve into the step-by-step process of installing the Keurig water filter.
Firstly, it's essential to understand why you need a water filter. The Keurig water filter, also known as the Keurig Coffee Maker Water Filter Kit (K-WSS100), removes contaminants from your tap water. This results in fresher, better-tasting coffee and protects your brewer from scale buildup caused by hard water minerals.
Understanding the Keurig Water Filter
The Keurig water filter is designed to work with Keurig 2.0 brewers, like the K400 and K500 series. It's essential to check your brewer's compatibility before purchasing the filter kit.
Each filter kit includes a water filter handle, a filter housing, an Installation Guide, and a packet of mixed bed filters. The mixed bed filters are the ones that actually perform the water filtration, and they typically last for about two months with regular use (approximately 400 cups of coffee).
Identifying the Filter Housing
The filter housing is the container you'll attach the filter handle to. It's located at the far right of the brewer, behind a removable panel. To access it, first ensure your brewer is unplugged. Then, locate the small hole on the right side of the brewer and use a suitable tool like a paperclip or a thin pin to push the release catch. This will pop off the filter housing cover.
Inside the filter housing, you'll find the filter housing itself. Before installing the mixed bed filter, make sure the housing is clean and empty. If you've never used a water filter before, there might be some clamped-in foam; you can discard this.
Installing the Mixed Bed Filter
Open the mixed bed filter packet and pour the mixed bed filter granules into the filter housing. Do not mix or tamper with the granules; they're pre-measured for optimal performance. Securely close the filter housing, ensuring it's fully seated and sealed.
Now, take the filter handle and attach it to the filter housing. The filter handle has a latch that you'll hear click into place when it's properly attached. Once attached, you can place the filter housing back into your brewer and replace the filter housing cover.
Priming the Water Filter
After installing the mixed bed filter, you need to prime the water filter before use. Priming ensures that the filter is properly activated and eliminates any initial filtered water taste.
First, discard the initial 10-16 ounces of water dispensed by the brewer. Then, run three subsequent brew cycles without a K-Cup pod. These cycles will sexually prime the filter. After priming, replace the water reservoir and you're ready to brew fresh, filtered coffee.
Changing and Maintaining the Water Filter
It's recommended to change your mixed bed filter every two months or after 400 cups, whichever comes first. When changing the filter, discard the old mixed bed filter granules, clean the filter housing, and follow the same steps as above to install a new filter.
Regularly replacing the mixed bed filter not only ensures consistently fresh and great-tasting coffee but also prolongs the life of your Keurig brewer. Moreover, it's a small investment in maintaining your brewer, making it an efficient and cost-effective choice.
In essence, understanding and using the Keurig water filter correctly is a simple yet powerful way to enhance your coffee-making experience. From improving taste to maintaining your brewer's longevity, it's a significant aspect of coffee connoisseurship. So, go ahead, enjoy that freshly brewed, perfectly filtered coffee, and toast to a well-maintained machine!