how to wire leviton switch

How to Wire a Leviton Switch: Step-by-Step Guide

By Matthew Lewis
AD

Embarking on a home improvement project like wiring a Leviton switch can seem daunting, but with the right guidance and safety measures, it's a task well within reach. This step-by-step guide will walk you through the process, from understanding the tools and components to the actual wiring.

Before we dive into the wiring process, let's ensure you have all the necessary tools and understand the components involved.

Preparation: Tools and Components

To wire a Leviton switch, you'll need the following tools and components:

AD
two lights and one light switch are shown in this diagram, which shows the wiring for each
two lights and one light switch are shown in this diagram, which shows the wiring for each
How to Wire a Light Switch - HandyManHowTo
How to Wire a Light Switch - HandyManHowTo
a light switch and outlet wiring diagram with two lights in the same room, one is turned on
a light switch and outlet wiring diagram with two lights in the same room, one is turned on
  • A Leviton switch (ensure it matches your application, such as single-pole, 3-way, or 4-way)
  • Wire strippers
  • Voltage tester
  • Wire connectors (wire nuts)
  • Screwdriver (typically a flathead for Leviton switches)
  • 14/3 or 14/2 non-metallic (NM) sheathed electrical cable, depending on your wiring needs
  • Fish tape (if running new cable)

Once you have all your tools and components, let's ensure the power is off and the circuit is safe to work on.

Safety First: Turn off Power

Safety should always be your top priority when working with electricity. First, locate your home's electrical panel and turn off the circuit breaker connected to the switch you'll be working on. Use a voltage tester to confirm the power is off before proceeding.

two light switches and one outlet wiring diagram
two light switches and one outlet wiring diagram
How to Install Smart Light Switches In Your Home
How to Install Smart Light Switches In Your Home

Understand Your Switch Type

Leviton switches fall into several categories, including single-pole, 3-way, and 4-way. Each type has its unique wiring requirements. Before you start, ensure you understand your switch type and consult the wire diagram provided with your switch.

Wiring the Leviton Switch

Now that you're prepared and powered down, it's time to start wiring your Leviton switch. This process involves running the cable, connecting the wires, and securing the switch.

AD

Running the Cable

If you're running new cable, use fish tape to pull it through the walls. Ensure the cable extends about 6-8 inches beyond the back of the electrical box. If you're replacing an existing switch, you might already have cable in place; if so, carefully remove the old cable before proceeding.

Stripping and Connecting the Wires

Strip about 1/2 inch of insulation from each wire using wire strippers. Connect the wires according to the switch's wire diagram. For a single-pole switch, the black (hot) wire goes to the brass screw, the white (neutral) wire goes to the silver screw, and the ground (green or bare) wire goes to the green screw. Secure each connection using a wire connector (wire nut).

Tuck the connected wires back into the electrical box, ensuring they're completely out of sight and pose no risk of touching other wires or the electrical box.

AD

Securing the Leviton Switch

Once the wires are connected and secured, position the Leviton switch in the electrical box. Secure it using the provided screws, ensuring it's level and tight against the box. Be careful not to overtighten the screws, as this can strip the switch's screw holes.

Finally, replace the cover plate and turn the power back on at the circuit breaker. Test your Leviton switch to ensure it's functioning correctly.

Common Troubleshooting Tips

If you're experiencing issues with your newly wired Leviton switch, here are some common troubleshooting tips:

AD

Switch Not Working

Double-check your wire connections. Ensure the hot wire is connected to the correct screw, and all connections are tight. Use a voltage tester to confirm power is reaching the switch.

Switch Is Hot

This could indicate a miswired switch. Ensure the ground wire is connected to the green screw and not the brass or silver screw. If the switch is still hot, consult an electrician.

Buzzing or Arcing

This can signal a loose connection or incorrect wire type. Ensure you're using 14/3 or 14/2 cable and that all connections are tight. If the issue persists, consult an electrician.

Wiring a Leviton switch might seem complex at first, but with patience, attention to detail, and a commitment to safety, it's a task any avid DIYer can tackle. By understanding the tools, components, and steps involved, you'll be well on your way to a successfully wired switch and a safer, more efficient home. Don't forget, if you're ever unsure, it's always best to consult a licensed electrician.

AD