how to install a leviton light switch

Step-by-Step: How to Install a Leviton Light Switch – Expert Guide

By Mark Williams
AD

Embracing the convenience of smart home technology begins with simple upgrades, like installing a Leviton light switch. This guide will walk you through the process, ensuring your home is one step closer to becoming a smart haven.

Before we start, let's clarify that this guide assumes you already have basic electrical knowledge and experience with replacing standard light switches. If you're new to electrical work, always consult a professional to ensure safety.

Preparation: Gather Tools and Materials

To complete this task, you'll need the following tools and materials:

AD
How to Install an Occupancy Sensor Light Switch - HandyManHowTo
How to Install an Occupancy Sensor Light Switch - HandyManHowTo
Spotlight: Installing a Legrand Light Switch
Spotlight: Installing a Legrand Light Switch
How to Install Smart Light Switches In Your Home
How to Install Smart Light Switches In Your Home
  • Leviton light switch
  • Flathead and Phillips screwdrivers
  • Wire cutter and stripper
  • Needle-nose pliers
  • Electrical tape
  • Wire nuts

Choosing the Right Leviton Switch

Leviton offers Lutron, Decora, and other series switches. Make sure to pick the right one to match your existing setup and accommodate your smart home system.

For this guide, we'll focus on installing a Decora-brand Leviton light switch, a popular choice for its wide compatibility and sleek design.

How to Program Leviton Light Switch Timer
How to Program Leviton Light Switch Timer
Replace 1 Switch with 2: Leviton Combination Device Installation
Replace 1 Switch with 2: Leviton Combination Device Installation

Preparing the Switch

Before installation, unpack your Leviton switch and ensure it's the correct model. If it's a smart switch, pair it with your smartphone or smart home hub as per the manufacturer's instructions.

Strip about ½ inch of insulation from the wires using your wire stripper. This ensures a secure connection when installing the switch.

AD

Removing the Old Switch

Turn off the power to the circuit you'll be working on at your home's main service panel to avoid electrical shocks.

Remove the faceplate and screws securing the old switch. Gently pull the switch out and disconnect the wires. Be cautious not to touch any exposed wires until you've double-checked that the power is off.

Wiring the Leviton Switch

Leviton's Decora switches usually follow a simple wiring scheme: black (hot) wire to the brass terminal, white (neutral) wire to the silver terminal, and green/bare (ground) wire to the green terminal.

AD

Connect the wires using the twisted-off technique: twist the ends of the wires together in a clockwise direction, then insert them into the switch terminals and tighten securely.

Mounting the Switch

Secure the switch to the electrical box using the screws provided. Ensure it's level with the wall and the faceplate will cover it correctly.

Reattach the faceplate, and turn the power back on at the main service panel.

AD

Testing the New Leviton Switch

Flip the circuit's breaker switch back on, and test the function of your new Leviton light switch. If you've installed a smart switch, ensure it's working correctly with your preferred smart home app.

If everything functions as expected, congratulations! You've successfully installed a Leviton light switch, taking a significant step towards a smarter, more connected home.

Now that you've gained hands-on experience with smart home technology, consider exploring other upgrades, like smart thermostats or security systems. Each step brings you closer to a fully equipped, high-tech sanctuary.

AD