how to wire double gang outlet

How to Wire a Double Gang Outlet

By Olivia Brown
AD

Wiring a double gang outlet, a housing for two electrical receptacles, is a common yet crucial electrical task. It not only provides more power outlets for your devices but also ensures safety by adhering tobuilding codes. Here's a comprehensive, step-by-step guide to help you wire a double gang outlet safely and efficiently.

Before we delve into the process, it's crucial to understand that electrical work should only be performed by qualified professionals or persons with appropriate knowledge and experience. Always prioritize safety by turning off the circuit breaker, using appropriate PPE, and following local regulations.

Preparation and Safety Measures

Before you begin, ensure you have the right tools and materials. You'll need a double gang outlet box, two electrical receptacles, 14/2 or 12/2 non-metallic sheathed cable, wire strippers, screwdrivers, a voltage tester, and safety glasses.

AD
Double Gang Outlet Conversion!
Double Gang Outlet Conversion!
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
Adding Outlets & Double Receptacle Wiring
Adding Outlets & Double Receptacle Wiring

First, turn off the circuit breaker connected to the outlet. Use a voltage tester to ensure the power is off before starting any work. Always assume wires are live until tested otherwise. Put on your safety glasses to protect your eyes from debris.

Wiring the Outlet Box

The outlet box should be securely installed in the wall opening. Ensure it's level and secured with screws. If it's not deep enough, use a deep box or extenders. The outlet box should be grounded, so if it's not, now is the time to ground it.

What Color Wire Goes to the Gold Screw on Outlet?
What Color Wire Goes to the Gold Screw on Outlet?
How To Wire A GFCI Outlet With Multiple Outlets -(Diagram Included)
How To Wire A GFCI Outlet With Multiple Outlets -(Diagram Included)

Once the box is secure, route the non-metallic sheathed cable into the box. Leave about 3 inches of cable inside the box for easier wiring. Ensure the cable can be pulled back into the box without damaging the wiring inside.

Wiring the Outlet

Strip about 2 inches of the outer jacket from the sheathed cable. Twist the exposed shielding back onto itself and secure it under a grounding screw on the side of the outlet box. This grounds the cable and the box.

AD

Next, strip about 3/4 of an inch of the insulation from the individual wires. Twist the ends of the black (hot) and white (neutral) wires clockwise and attach them to their respective screws on the outlet. The green (ground) wire should be attached to the grounding screw. Screw the wires tightly, but avoid overtightening.

Installing the Outlet

Gently bend the wires back into the box and insert the outlet. Secure it with the provided screws, ensuring it's level and tight against the drywall.

Before you close the outlet box, use a voltage tester to confirm there's no power in the wires. If all is well, close the outlet box and turn the circuit breaker back on.

AD

Testing the Outlet

Use a voltage tester to confirm power in the outlet. Plug in a lamp or other device to test the outlet. It should work perfectly. If not, double-check your wiring and start again.

Once confirmed, replace the cover plate, and enjoy your new double gang outlet!

Always remember, electrical work should be treated with the utmost respect. If you're unsure about any aspect, consult a licensed electrician. With proper safety measures and careful attention to detail, wiring a double gang outlet can be a satisfying DIY task.

AD
AD