how to wire an outlet in parallel

How to Wire an Outlet in Parallel

By Melissa King
AD

Wiring an outlet in parallel can seem like a daunting task, but with the right knowledge and tools, it's a project that any DIY enthusiast can tackle. Parallel wiring, as opposed to series, allows both outlets to function independently and remain powered if one circuit is disrupted. This guide will walk you through the steps to wire an outlet in parallel, ensuring a safe and efficient electrical connection.

Before we begin, it's crucial to emphasize the importance of safety. Always turn off the power at the main circuit breaker, use proper safety equipment, and follow local electrical codes to prevent any accidents. If you're unsure about any aspect of the process, consider consulting a licensed electrician.

Understanding Parallel Wiring

In parallel wiring, both outlets share a hot and neutral wire, but each has its own ground wire. This allows each outlet to function independently, as any break or interruption in the circuit only affects the specific outlet. To visualize this, imagine two lamps connected to the same power source but on different switches. If one lamp goes out, the other continues to work.

AD
wiring multiple outlets in parallel to each other
wiring multiple outlets in parallel to each other
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
Wiring Outlets In Parallel Diagram
Wiring Outlets In Parallel Diagram

There are two main types of outlets: 15-amp and 20-amp. Both can be wired in parallel, but it's essential to match the amperage of the outlets to the circuit they're connected to. This ensures optimal performance and safety.

Gathering Materials and Tools

Before starting, gather the necessary materials and tools. You'll need a 15-amp or 20-amp outlet (depending on your circuit), wire connectors (also known as wire nuts), and sufficient electrical cable (such as 14/2 or 12/2 NM-B for 15-amp and 20-amp circuits respectively). Additionally, you'll require a non-contact voltage tester, wire stripper, and electrical tape.

How to Wire an Outlet Off a Switch (7 Steps)
How to Wire an Outlet Off a Switch (7 Steps)
How to Wire an Outlet
How to Wire an Outlet

Ensure that the cable and outlets you use are appropriate for your circuit's amperage and comply with local electrical codes. Always prioritize safety over cost or convenience.

Preparing the Wires and Box

First, turn off the power to the circuit at the main breaker. Use a non-contact voltage tester to ensure that the power is off before proceeding. Remove the existing outlet or the cover plate to access the electrical box. If there's an existing outlet, make sure it's disconnected from the wires.

AD

Strip the outer insulation from the electrical cable, exposing about 3 inches of individual wires. If you're using 14/2 or 12/2 NM-B cable, you'll have a white (neutral), black (hot), and bare (ground) wire. Carefully remove around 1.5 inches of insulation from each wire using a wire stripper.

Wiring the Outlets

Now that you've prepared the wires and box, it's time to wire the outlets in parallel. The process involves connecting the hot and neutral wires from the cable to both outlets, while each outlet has its own ground wire.

Start by connecting the ground wires. Twist the original outlet's ground wire with the ground wire from the cable using a wire connector (wire nut). Connect the newly formed ground wire to the green screw on the new outlet. Ensure that the connection is tight and secure.

AD

Attaching the Hot Wire

The black (hot) wire from the cable will connect to the brass-colored terminals on both outlets. Twist the hot wire from the cable with the existing hot wire using a wire connector. Then, connect this combined hot wire to the brass-colored terminals on both outlets. Make sure the wires are securely attached and not overtightened, which can cause damage.

It's crucial to note that you should not connect the hot wires (brass screws) directly to the backstab terminals on the outlets. Backstabs are not as reliable as the side terminals and can cause issues over time. Always use the side terminals for a secure connection.

Connecting the Neutral Wire

The neutral wire (white) from the cable connects to the silver-colored terminals on both outlets. Twist the neutral wire from the cable with the existing neutral wire using a wire connector. Connect this combined neutral wire to the silver-colored terminals on both outlets. Just like the hot wire connection, ensure the wires are securely attached but not overtightened.

AD

Tuck the wires back into the electrical box neatly, using electrical tape to secure them if necessary. This ensures that the wires are not a fire hazard and provides a clean, professional look.

Testing and Securing

Before turning the power back on, double-check that all wires are securely connected and none are overtightened. Use a screwdriver to gently tug on the wires attached to the outlets to ensure they're properly secured. Additionally, check that the ground wires are tightly connected and not loose.

Once you're confident that all connections are secure, you can restore power to the circuit at the main breaker. Use the non-contact voltage tester to confirm that power is present at the new outlet. If everything is functioning correctly, you can secure the outlet in place and replace the cover plate.

Wiring an outlet in parallel is a straightforward process that can enhance the functionality of your home's electrical system. With proper safety precautions and careful attention to detail, you can achieve a reliable and efficient electrical connection. Always consult local electrical codes and seek professional help when needed to ensure a safe and successful project.

AD