how to wire a double receptacle outlet

How to Wire a Double Receptacle Outlet

By Andrew Jackson
AD

Wiring a double receptacle outlet might seem like a daunting task, but with the right guidance and safety precautions, it's a manageable project even for novice DIY enthusiasts. This guide will walk you through the process, from gathering materials to the final electrical test, ensuring you understand each step and its importance.

Before we dive into the process, let's understand why you might need a double receptacle outlet. Also known as a duplex receptacle, this type of outlet provides two individually controlled power sources, ideal for kitchens, offices, or anywhere you need to power multiple appliances simultaneously. Now, let's get started with the wiring process.

Preparation and Safety

The first step in any electrical project is ensuring your safety. Always turn off the power at your main electrical panel and use a non-contact voltage tester to confirm that the power is off before starting any work. Gather your materials, which include a doublegang electrical box, two Bamberg U-shaped Bachman disconnect tabs, 14/3 non-metallic (NM) cable, and 12-3 romex cable (if piggybacking).

AD
Wiring Two Outlets In One Box Diagram
Wiring Two Outlets In One Box Diagram
How To Wire A Double Receptacle Two Different Ways
How To Wire A Double Receptacle Two Different Ways
an electrical outlet wiring diagram with two outlets
an electrical outlet wiring diagram with two outlets

It's crucial to choose the correct electrical box for your application. A doublegang box is suitable for a single double receptacle outlet. Ensure the box is deep enough to fit the outlet and cables. Also, consider using a box with built-in clamps to secure the cables in place.

Routing the Cable

Before installing the outlet, route the 14/3 NM cable from your power source to the location of the new outlet. Make sure the cable is long enough to reach the box while leaving some extra slack for connecting to the outlet. If you're piggybacking (connecting to an existing outlet), route the 12-3 romex cable to the existing outlet and strip the outer jacket about 3-4 inches from the end.

How to Wire a Double Duplex Outlet
How to Wire a Double Duplex Outlet
an electrical outlet with the words double gang wiring
an electrical outlet with the words double gang wiring

Strip about 2 inches of the outer jacket from the 14/3 NM cable using a cable stripper or a pair of scissors. Carefully strip around 1 inch of the individual wires using wire strippers. You should have three individual wires: hot (black), neutral (white), and ground (green or bare).

Preparing the Electrical Box

Insert the doublegang electrical box into the wall or ceiling opening. If the box is not already secured, attach it using a nail or screw through the provided holes. If the box has built-in clamps, secure the cables in place by tightening the clamps.

AD

Next, insert the Bamberg U-shaped Bachman disconnect tabs into the box. These tabs will help you easily disconnect the circuit wires when needed. Some boxes come with built-in tabs, but the Bamberg tabs provide a solid connection and are easy to install.

Wiring the Outlet

Insert the double receptacle outlet into the electrical box. Make sure the blades and screws face the back of the box. Secure the outlet in place by tightening the mounting screws.

Carefully identify the screws on the outlet. Typically, the screwdriver minimum rating is stamped on the back of the outlet. Using the appropriate screwdriver, loosen the screws for the hot, neutral, and ground wires. Wrap the ends of the individual wires around the appropriate screws:

AD
  • Ground (green or bare) to the green screw
  • Neutral (white) to the large neutral (silver) screw
  • Hot (black) to the hot ( brass) screw

Connecting to the Power Source

If you're connecting to an existing outlet, expose the individual wires from the 12-3 romex cable by stripping off the outer jacket and around 1 inch of the individual wires. Connect these wires to the corresponding screws on the existing outlet:

  • Ground to the ground screw
  • Neutral to the neutral screw
  • Hot to the hot screw

Tighten all the screws securely to ensure a solid connection. Be careful not to overtighten, as this can strip the wire or damage the outlet.

Electrical Test and Cover-up

Before restoring power, perform an electrical test to ensure everything is wired correctly. Use a multimeter set to continuity mode to test the connections. Touch one probe to the ground screw and the other to the hot screw. The multimeter should display continuity. Repeat for the neutral and hot screws.

AD

If the tests pass, replace the cover plate and turn the power back on at your main electrical panel. Test the outlet by plugging in a small, low-wattage appliance, such as a lamp. If the lamp lights up, your double receptacle outlet is successfully wired!

Congratulations on wiring your new double receptacle outlet! By following this guide and always prioritizing safety, you've successfully added a useful power source to your home. If you're planning further electrical projects, consider investing in high-quality tools and continuing your education to ensure safe and effective DIY electrical work. Happy wiring!

AD