how to wire 2 outlets in one box

How to Wire 2 Outlets in One Box: Simple Step-by-Step Guide

By John White
AD

Ever found yourself in need of powering multiple devices from a single wall location? Wiring two outlets in one box allows you to do just that, maximizing space and convenience. This guide will walk you through the process, ensuring safety and compliance with standard electrical codes.

Before we dive in, remember that working with electricity requires careful attention and knowledge. If you're uncertain about any step, consult a professional electrician. Now, let's get started with gathering your materials.

Gather Your Materials and Tools

First, ensure you have all the necessary components and tools:

AD
How to Install and Wire 2 Outlets in One Box Correctly From Start to Finish!
How to Install and Wire 2 Outlets in One Box Correctly From Start to Finish!
How to Wire 2 Outlets In One Box | Wiring a Double Receptacle the Correct Way
How to Wire 2 Outlets In One Box | Wiring a Double Receptacle the Correct Way
How To Wire An Electrical Outlet Wiring Diagram | House Electrical Wiring Diagram
How To Wire An Electrical Outlet Wiring Diagram | House Electrical Wiring Diagram

  • Two 15-amp or 20-amp outlets (receptacles)
  • An appropriate outlet box (junction box) that's large enough to accommodate both outlets and wiring
  • Wiring (usually 12/2 or 14/2 non-metallic (NM) cable, depending on your household's requirements)
  • Wire stripper
  • Scissors or a utility knife to cut the box cover
  • Wire nuts
  • Fish tape (optional, for fishing wires through walls)

How to Wire Two Outlets in One Box (6 Easy Steps)
How to Wire Two Outlets in One Box (6 Easy Steps)
How to Wire an Outlet
How to Wire an Outlet

Once you've gathered everything, let's discuss where and when to install the outlets.

Choose a Suitable Location and Timing

Select a spot that's both accessible and safe for your electrical needs. Consider the devices you'll power and choose a spot that's out of reach of curious hands, particularly if you have small children. Also, avoid placing outlets near water sources to prevent electrical hazards.

AD

It's generally a good idea to work on electrical projects when you're fresh and alert. For your safety, turn off the power at the main circuit breaker and use a non-contact voltage tester to ensure the wires are dead before proceeding. Now, let's move on to installing the outlet box.

Install the Outlet Box

Installing the box involves a few steps:

AD
  1. Turn off the power and test the wires to ensure they're dead.
  2. Remove the existing cover plate and any old wiring.
  3. Make sure the electrical box is securely attached to the framing or replaced if damaged.
  4. Insert the new outlet box, ensuring it's level and deep enough to accommodate both outlets and wiring.
  5. Secure the box in place using screws, taking care not to overtighten and strip the screw heads.
  6. Insert both outlets into the box, securing them temporarily with the bend of the tabs at the back.

Before proceeding with the wiring, let's delve into understanding the wiring connections.

Understand the Wiring Connections

Wiring a junction box with two outlets involves understanding the electrical circuit's basics. In most homes, your black (hot) wire carries electricity to the outlets. The white (neutral) wire carries the current back to the panel, while the green or bare wire (ground) serves as a safety connection to protect against shorts and overloads.

AD

When wiring two outlets, the power enters and exits through the first outlet, referred to as the line, while the second outlet acts as a load. This means it receives its power from the first outlet, needing only the hot and neutral wires connected. Let's discuss wiring the line (first) outlet.

Wire the Line (First) Outlet

Imagine the power entering your home from the main electrical panel. It passes through wires to the junction box you've installed, where you'll connect it to the line outlet:

  1. Strip about 3/4 inch of insulation from the end of the incoming power cable using your wire stripper.
  2. Connect the black wire (hot) to the brass-colored terminal labeled 'LINE' on the line outlet.
  3. Connect the white wire (neutral) to the silver-colored terminal labeled 'LINE'.
  4. Connect the green or bare wire (ground) to the green terminal on the line outlet.

Next, let's wire the load (second) outlet.

Wire the Load (Second) Outlet

The load outlet doesn't require the ground wire connected since it already has one from the line outlet. Here's how to wire it:

  1. Strip about 3/4 inch of insulation from the ends of the red and black wires (hot) from the first outlet.
  2. Connect the red wire to the brass-colored terminal labeled 'LOAD' on the load outlet. This ensures power 'loads' up the second outlet.
  3. Connect the black wire to the silver-colored terminal labeled 'LOAD'.

Now that you've wired both outlets, let's ensure your work is safe and up to code.

Safety Checks and Securing the Outlets

Before closing up the box, perform a few safety checks:

  1. Tighten all connections using appropriate voltage-rated wire nuts.
  2. Ensure no wires are touching each other or the electrical box, as this can lead to shorts and fires.
  3. Verify that each outlet's tabless feature, which prevents over-stuffing, is properly positioned.
  4. Use a non-contact voltage tester to confirm there's no power at the load outlet. If there is, double-check your wiring connections.

Finally, secure both outlets in place by bending the tabs at the back and tucking them into the outlet box. Replace the cover plate, turn the power back on, and use a voltmeter to test each outlet to ensure they're working correctly.

There you have it! You've successfully wired two outlets in one box, maximizing your space and powering convenience. Keep your new outlets clean and free of debris, and remember to inspect your electrical work periodically to ensure it remains safe and up to code. Now go ahead and enjoy the benefits of your newly wired space!"

AD