how to turn on irrigation system after winter

"Spring Forward: Revive Your Irrigation System"

By John Hernandez
AD

Spring has sprung, and it's time to rejuvenate your garden after the long winter slumber. One of the essential tasks to revive your landscape is turning on your irrigation system. This vital system ensures your plants, trees, and lawn receive the right amount of water at the right time. Here's a step-by-step guide to help you prepare and start your irrigation system safely and efficiently.

Before diving into the process, it's crucial to ensure your irrigation system is in good working order. Winter can be harsh on outdoor systems, so a thorough inspection and a little preparation will go a long way in preventing costly repairs and water waste. Let's start with your sprinkler system.

Preparing Your Sprinkler System

A well-maintained sprinkler system can last for decades. To ensure its longevity, follow these preparatory steps:

AD
how to winterize your sprinkler system
how to winterize your sprinkler system
Turning On Sprinkler System After Winter
Turning On Sprinkler System After Winter
Winterizing Your Irrigation System
Winterizing Your Irrigation System

Inspect for Leaks: Begin by checking your sprinkler system for any visible leaks or damage. Walk the perimeter of your sprinkler zones and look for any wet spots or standing water that aren't there to catch snowmelt.

Test the System

Before turning on the water, it's crucial to test the functionality of your sprinkler system.

❄️ Essential Guide: Winterizing Your Irrigation System
❄️ Essential Guide: Winterizing Your Irrigation System
How to Winterize Your Irrigation System
How to Winterize Your Irrigation System

1. Manually turn on each zone one by one, allowing the water to run for a few minutes to check for leaks or clogs.

2. Mark any zones that don't seem to be working properly, so you can address them after the test.

AD

Check for Pressure

Too much or too little water pressure can damage your lawn and sprinkler system. Ideal water pressure for sprinklers is between 40-50 PSI. Use a pressure gauge to monitor the pressure at the outdoor water faucet.

Adjust as needed: If the pressure is too high, you may need to install a pressure regulator. Low pressure might indicate a closed main valve or a problem with your well pump (if you have one).

Restarting the Irrigation Timer

After ensuring your sprinkler system is in good working order, it's time to restart your irrigation timer (also known as a controller). Modern timer models have unique start-up procedures, so consult your manufacturer's instructions for precise steps.

AD

Here's a general procedure for typical irrigation controllers:

Reprogram watering schedules: Winter's freezing temperatures might have affected your controller's internal clock. Reset the time and reprogram your watering schedules. Consider your plants' water needs, local weather patterns, and any seasonal restrictions.

Reconnect the rain sensor: If you have a rain sensor, reconnect it according to the manufacturer's instructions. These devices temporarily suspend irrigation cycles when enough rain has fallen, helping you save water.

AD

Perform a Once-Through Flush

After reprogramming your controller, perform a once-through flush to clear your sprinkler lines of any leftover winter debris.

Set all zones to run for one cycle: Choose a zone from your marked list (that doesn't have leaks) and set it to run for one cycle. This will help push out any sediment, rust, or trapped air in the lines.

Sprinkler Maintenance Tips

To keep your sprinkler system running efficiently throughout the growing season, follow these maintenance tips:

Inspect and clean nozzle filters: Damage from winter could have left your sprinkler heads clogged with debris. Clean the nozzle filters and replace any broken or cracked sprinkler heads.

Adjust sprinkler head heights: Over time, the ground around your sprinkler heads may settle, affecting their spray patterns. Regularly inspect your sprinkler heads to ensure they're correctly spaced andheights adjusted to maintain optimal water coverage.

Turning on your irrigation system in the spring might seem like a daunting task, but with this comprehensive guide, you'll have your garden looking lush and verdant in no time. By following these steps and performing regular maintenance, you'll keep your irrigation system running smoothly and ensure your plants receive the water they need to thrive.

Pro tip: Consider installing a smart irrigation controller that uses local weather data and evapotranspiration rates to adjust watering schedules automatically.

Now that your irrigation system is up and running, monitor it closely in the first few weeks. Keep an eye out for any leaks or dry spots in your lawn, and make adjustments as needed. Happy gardening!

AD