how to thread husqvarna viking

Step-by-Step: How to Thread a Husqvarna Viking | Sewing Machine Tutorial

By Brian Lopez
AD

Threading a Husqvarna Viking sewing machine is a crucial step in ensuring smooth and efficient sewing. It might seem daunting at first, but with the right guide, it's a straightforward task. This comprehensive guide will walk you through the process in simple, easy-to-understand steps.

Before you begin, ensure you have the correct needle for your Husqvarna Viking sewing machine. Using the wrong needle can cause damage to your machine and affect the quality of your stitches. Once you have the right needle, let's dive into the threading process.

Understanding Your Husqvarna Viking Sewing Machine

Familiarizing yourself with the parts of your Husqvarna Viking sewing machine will make the threading process easier. The key parts you need to know are the needle plate, the take-up lever, and the thread guide.

AD
Threading Your Viking Husqvarna 1100
Threading Your Viking Husqvarna 1100
Husqvarna Viking Sewing Machine Troubleshooting and Repairs Guide
Husqvarna Viking Sewing Machine Troubleshooting and Repairs Guide
Set up and use a Husqvarna Viking H|CLASS™ E10
Set up and use a Husqvarna Viking H|CLASS™ E10

The needle plate is where the needle is located. The take-up lever is the crank handle used to wind the upper thread onto the bobbin. The thread guide is a series of plastic or metal guides that direct the thread from the spool to the needle.

Preparing the Thread

Start by unrolling about 18 inches of thread from the spool. This length will give you enough thread to thread your machine and start sewing.

Threading Your Viking Husqvarna 1100 - Bobbin Winding
Threading Your Viking Husqvarna 1100 - Bobbin Winding
How to Thread Viking Husqvarna Classica 105 | ehow.com
How to Thread Viking Husqvarna Classica 105 | ehow.com

Next, tie a knot at the end of the thread. This knot will help secure the thread in the machine and prevent it from slipping out. Make sure the knot is large enough to fit through the thread hole in your machine but not so large that it causes tension.

Threading the Top of the Machine

Begin by placing the spool of thread on the spool pin at the top of your sewing machine. Make sure the thread comes off the spool from the top.

AD

Follow the thread path indicated by the thread guides. Most Husqvarna Viking machines have a clear thread path with numbered or marked guides. Insert the knotted end of the thread through the first guide and continue following the path until you reach the take-up lever.

Threading the Needle

Begin by placing the thread over the take-up lever and through the hole at the back of the lever. Then, bring the thread over the top of the lever and through the hole at the front of the lever.

Now, bring the thread down to the needle plate. Remove the needle from the needle plate (if it's not already removed) and insert the knotted end of the thread through the eye of the needle from back to front. Make sure the knot is on the underside of the needle plate. This orientation will ensure that the knot pulls the thread through the needle rather than pushing it back out.

AD

Threading the Bobbin

Threading the bobbin is a separate process from threading the top of the machine. It's crucial to ensure that the bobbin is threaded correctly, as this will determine the quality of your stitches.

The bobbin can usually be found under the needle plate. Remove the needle plate to access the bobbin. Some machines will have a Bobbin Winder function that can help with this process. Always consult your machine's manual for specific instructions.

Winding the Bobbin

Before threading the bobbin, you'll need to wind it with thread. Start by placing an empty bobbin on the bobbin winder (if your machine has one). Bring the thread from the spool over the bobbin, down through the hole in the bobbin, and around to the top of the bobbin.

AD

Wind the thread around the bobbin, working from the top to the bottom in a clockwise direction. Continue winding until the bobbin is full. Make sure to keep the thread taut but not too tight, as this can cause the bobbin to not spin properly.

Placing the Bobbin in the Machine

Once the bobbin is wound, carefully place it into the bobbin case under the needle plate. The bobbin should sit in the case with the thread coming up from the bottom.

Bring the thread up through the hole in the needle plate, following the thread path indicated by the guides. Make sure the thread is going through the guides in the right direction, and there are no twists in the thread. Finally, bring the thread over to the take-up lever and insert it into the hole on the underside of the lever.

Congratulations! You've successfully threaded your Husqvarna Viking sewing machine. Now you're ready to start sewing. Remember, practice makes perfect. The more you sew, the more comfortable and quicker you'll become at threading your machine. Happy sewing!

AD