how to test ac capacitor with digital multimeter

How to Test AC Capacitor with Digital Multimeter

By Richard Taylor
AD

Testing an AC capacitor with a digital multimeter (DMM) might seem daunting at first, but with a little understanding of how capacitors work and the right techniques, it's quite straightforward. AC capacitors are crucial components in many circuits, and knowing how to test them ensures the reliable performance of your electrical systems.

Before we dive into the testing process, let's ensure you have the right tools. You'll need a digital multimeter, which can measure voltage, current, and resistance. Safety is paramount when handling capacitors, so make sure to discharge them before testing to avoid electric shock. Now, let's proceed to understand and test AC capacitors.

Understanding AC Capacitors

AC capacitors store and release electrical energy in AC (alternating current) circuits. They help smoothen voltage or current, filter out noise, and maintain the stability of DC (direct current) power supplies. There are two main types: film capacitors and electrolytic capacitors. Understanding their differentiators is crucial for accurate testing.

AD
8 Ways to Test a Capacitor Using a Digital or Analog Multimeter (DMM/AVO): How to Determine if a Capacitor is Functional, Defective, Open, Shorted, or Fully Damaged
8 Ways to Test a Capacitor Using a Digital or Analog Multimeter (DMM/AVO): How to Determine if a Capacitor is Functional, Defective, Open, Shorted, or Fully Damaged
an ac capacitor is hooked up to a multimeter with the words how to test an ac capacitor
an ac capacitor is hooked up to a multimeter with the words how to test an ac capacitor
the capacitor by multimeterer in the capacitor setting is shown
the capacitor by multimeterer in the capacitor setting is shown

Film capacitors use plastic film as the dielectric, making them suitable for straightforward voltage withstand testing. Electrolytic capacitors, on the other hand, use an electrolyte for enhanced capacitance, but this makes them more susceptible to voltage polarity. Always remember to test electrolytic capacitors with the correct polarity to avoid damage.

Testing AC Capacitors with a Digital Multimeter

Now that we understand AC capacitors better, let's discuss how to test them using a DMM. The test involves measuring the resistance and comparing it with the capacitance rating. Here's a step-by-step guide:

8 Ways to Test a Capacitor Using a Digital or Analog Multimeter (DMM/AVO): How to Determine if a Capacitor is Functional, Defective, Open, Shorted, or Fully Damaged
8 Ways to Test a Capacitor Using a Digital or Analog Multimeter (DMM/AVO): How to Determine if a Capacitor is Functional, Defective, Open, Shorted, or Fully Damaged
How to Test a Capacitor
How to Test a Capacitor

Step 1: Select the Right DMM Mode

Digital multimeters have multiple modes, but for testing AC capacitors, select the 'Ohms' or 'Resistance' mode. Typically, this is represented by the Greek letter omega (Ω) or the word 'Ohms'. Some DMMS might denote this with a symbol like '

  • > (SIUnit of electrical resistance)

AD

Step 2: Discharge the Capacitor

Safety first! Before testing, make sure to discharge the capacitor fully. Remove it from the circuit, then touch the multimeter probes momentarily to the capacitor terminals to bleed off any remaining charge.

Step 3: Measure the Capacitor

Now, place the multimeter probes across the terminals of the discharged capacitor. In the 'Ohms' mode, the DMM will display a high resistance reading, typically in the tens of kilohms (kΩ) or megaohms (?Ω). If the reading is infinite, your capacitor is faulty or disconnected. If the reading is within the expected range, proceed to analyze the results.

Interpreting the Resistance Reading

The resistance reading indicates the capacitor's quality. For new and good quality capacitors, readings can be as high as 20+ MΩ. Lower readings suggest that the capacitor is degraded or faulty. Here's a general guide:

AD
  1. Excellent - 20+ MΩ
  2. Good - 4 to 20 MΩ
  3. Fair - 1 to 4 MΩ
  4. Poor - Less than 1 MΩ

Comparing the Results with the Capacitor Rating

Capacitors come with a rating ( typically μF) and a maximum working voltage (V). After measuring the resistance, compare the results with the capacitor's specification. Ideally, the resistance should be much higher than the suggested values above. If it's significantly lower, consider replacing the capacitor.

Testing Electrolytic Capacitors

Electrolytic capacitors have a specific polarity, indicated by a '+ 'symbol and a '-' symbol. Always test electrolytic capacitors with the correct polarity. The negative terminal is usually marked with a '-' sign, a band, or a recessed hole. Reversing the polarity can damage the capacitor and cause leakage.

Remember, testing capacitors is just another aspect of maintaining your electrical systems' reliability. Understanding your components and their testing methods goes a long way in ensuring the longevity and efficiency of your circuits. So, happy capacitor testing! And always prioritize safety first.

AD
AD