how to test a dryer heating element

How to Test a Dryer Heating Element: A Step-by-Step Guide

By Nicole Thomas
AD

When your dryer isn't heating properly, it can be frustrating, but don't let the repair intimidate you. Testing a dryer heating element is a straightforward process that you can tackle on your own. This guide will walk you through the steps, ensuring your dryer is back to its warm, efficient self in no time.

Before we dive in, remember safety first. Unplug your dryer, allow it to cool, and always wear appropriate safety gear, such as safety glasses and gloves, when handling electrical components.

Understanding the Dryer Heating Element

First, let's understand the dryer heating element's role. It's a metal coil that passes high electrical current through it, causing it to heat up and transfer heat to the air inside your dryer. If the heating element is faulty, it could either not heat, or not heat properly, leading to longer drying times and squashed clothes due to over-packing.

AD
Kenmore Electric Dryer - Not Heating, What to Test and How to Test
Kenmore Electric Dryer - Not Heating, What to Test and How to Test
How To Test A Dryer Heating Element – Storables
How To Test A Dryer Heating Element – Storables
How to replace a dryer drive motor | Repair guide
How to replace a dryer drive motor | Repair guide

Now, let's identify the heating element. It's typically located in one of two places: at the back of the dryer drum, behind a panel that you'll need to remove, or behind the dryer's lower front panel, hidden by the lint trap area.

Locating the Heating Element

To find the heating element, consult your dryer's manual or look up an online diagram for your specific model. You'll need to remove panels or access panels to expose the element. Keep track of how you disassemble the dryer, so you can put it back together correctly.

HOW TO REPLACE A DRYER HEATING ELEMENT: Replacing a Heating Element on a Kenmore Series 70 Dryer
HOW TO REPLACE A DRYER HEATING ELEMENT: Replacing a Heating Element on a Kenmore Series 70 Dryer
How to replace a heating element in an electric dryer | Repair guide
How to replace a heating element in an electric dryer | Repair guide

Once exposed, look for the heating element, which will be a metal coil. It's usually around the drum or sometimes underneath it. The wire connected to the heating element will help you identify it.

Check the Wiring and Connections

Before testing the element, ensure the wires connected to it are secure, tight, and not burnt or damaged. Poor connections can cause the dryer to malfunction. If the wires are damaged, you may need to replace them before testing the heating element.

AD

Also, inspect the thermostat. If the dryer's running, but not heating, the thermostat might be at fault. However, this guide focuses on testing the heating element. If you suspect the thermostat, a separate guide would be needed to test it.

Testing the Dryer Heating Element

Alright, let's get down to testing the heating element. You'll need a multimeter, which measures electrical resistance and continuity. If you don't have one, consider purchasing a low-cost digital multimeter for other DIY electrical tasks.

Setting your multimeter to its lowest resistance setting (usually denoted as 'Ω') or the continuity setting (denoted by a sound wave), proceed with the following steps.

AD

Testing for Continuity

Touch one multimeter probe to each end of the heating element. Your multimeter should beep or show a low resistance reading (usually less than 5 ohms). If it doesn't, the heating element is faulty and needs replacing.

If the element is internally damaged, such as a break in the coil, the multimeter might not show continuity between the two ends. In this case, the heating element should be replaced. Remember, always double-check your multimeter settings and tests to avoid unnecessary replacements.

Checking for Overheating

Sometimes, a dryer might run but not heat due to a faulty temperature safety switch or thermal fuse. Test the heating element for overheating using a pyrometer or infra-red thermometer. With the dryer running, the element should heat up to around 180°C (360°F). If it doesn't reach this temperature, the issue might not be with the element but elsewhere in the dryer's heating system.

AD

Always double-check your readings and tests, and consult a professional if you're unsure. DIY electrical repairs can be dangerous if not done correctly.

In the world of DIY repairs, knowing how to test a dryer heating element is a valuable skill. It can save you significant money in repair costs and ensure your dryer is running efficiently and safely. Happy fixing!

AD