how to test a coil on a chainsaw

Chainsaw Coil Test: A Simple Step-by-Step Guide

By James Jones
AD

If your chainsaw is suddenly struggling to cut, it might be time to test your engine's spark coil. A faulty coil can lead to poor engine performance or even failure to start. Here's a step-by-step guide to help you diagnose and fix your chainsaw's spark coil issue.

Before you begin, ensure you have the right tools, including a socket wrench, a spark plug tester, and a new spark plug if needed. Also, Always disengage the chain brake and unplug the chainsaw before performing any maintenance. Your safety should always be your top priority.

Understanding Your Chainsaw's Spark Coil

The spark coil, also known as the ignition coil, generates the high voltage needed to create a spark at the spark plug. This spark, in turn, ignites the fuel in your chainsaw's engine. A faulty coil can lead to a weak or no spark, causing poor engine performance or no start at all.

AD
How to test a chainsaw coil with a multimeter: Step-by-step
How to test a chainsaw coil with a multimeter: Step-by-step
How I Got My Chainsaw Started After 3 Years of Not Using It - EricTheCarGuy
How I Got My Chainsaw Started After 3 Years of Not Using It - EricTheCarGuy
Chainsaw Won't Start - No Spark - How to DIAGNOSE , TEST & INSTALL an IGNITION COIL
Chainsaw Won't Start - No Spark - How to DIAGNOSE , TEST & INSTALL an IGNITION COIL

Before you replace the coil, it's crucial to test it to ensure it's the root cause of the problem. Replacing a functioning coil is unnecessary and a waste of your time and money.

Testing the Spark Coil

Testing your spark coil is relatively straightforward. You can use a spark plug tester or perform a simple visual inspection. Here's how to do both:

How To Test A Coil On A String Trimmer - Hunker
How To Test A Coil On A String Trimmer - Hunker
HOW-TO Fix A Chainsaw With No Spark - Ignition Module Replacement
HOW-TO Fix A Chainsaw With No Spark - Ignition Module Replacement
  • Using a Spark Plug Tester: Remove the spark plug from your chainsaw. Clean the electrodes to remove any dirt or debris. Attach the spark plug tester, adjust it to the 'Test' position, and ground it against the engine block. Pull the starter cord; if there's a good spark, you'll hear a cracking sound and see a dependable flash. A weak or no spark indicates a faulty coil.
  • Visual Inspection: Remove the spark plug, and examine the central electrode. If it's dry or only lightly brown, your coil is likely fine. A blackened electrode could indicate a fouled plug or coil, while a pearl-colored one suggests pre-ignition or spark plug misfiring, both of which could be caused by a faulty coil.

Testing the Spark Plug

Before you condemn the spark coil, it's wise to test the spark plug as well. A bad spark plug can also cause poor engine performance or no start.

Use the steps above to test the spark plug. If the spark is strong and consistent, the problem likely lies elsewhere. If it's weak or absent, replace the spark plug, and then test it again. If the new plug also fails to spark, the issue is likely with the coil.

AD

Replacing the Faulty Spark Coil

If your coil tests bad, it's time for a replacement. Here's a quick guide:

  1. Unscrew and remove the old coil bracket.
  2. Remove the old coil from the bracket.
  3. Plug in the new coil, ensuring the top connects to the ignition wire, and the bottom connects to the spark plug.
  4. Replace the bracket, and secure it with the screws.

After replacing the coil, test your chainsaw to ensure it's running smoothly. If not, consult a professional. Regular maintenance can prevent many issues, so always use fresh fuels and lubricants, and store your chainsaw properly.

Happy chainsawing! Remember, safety first, always wear appropriate personal protective equipment, and follow the guidelines in your chainsaw's manual.

AD
AD