how to take off moen shower handle

How to Easily Remove Moen Shower Handle

By Joshua Johnson
AD

Tired of a loose or stiff Moen shower handle? Knowing how to take off a Moen shower handle can save you time and money. Read on to find out how to safely and easily remove your Moen shower handle for repairs or replacement.

Before you start, ensure you have the necessary tools. You'll typically need a Moen handle removal tool (or a flathead screwdriver), a pair of channel lock pliers, and a towel. With these tools and our detailed guide, you’re all set to tackle this DIY project.

Understanding Moen Shower Handle Types

Moen offers various shower handles. Identifying your handle type is crucial for the removal process.

AD
How to Remove Shower Handle Sans Screws: DIY Guide
How to Remove Shower Handle Sans Screws: DIY Guide
Updating an old Moen shower valve with pictures. TL473 or TL470
Updating an old Moen shower valve with pictures. TL473 or TL470
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide

1. **Cross Handles**: These are the most common Moen shower handles, featuring a single handle that controls both hot and cold water.

Cross Handle Removal

First, turn off the water supply taps. Apply the Moen handle removal tool (or a flathead screwdriver) over the set screw on the underside of the handle. Gently push down and turn counterclockwise until the screw is completely removed.

How to Change Shower Handle: Easy DIY Guide | CRANACH
How to Change Shower Handle: Easy DIY Guide | CRANACH
How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers

Now, using channel lock pliers, grasp the handle firmly but carefully. Turn the handle counterclockwise to unscrew it from the stem. Once the handle is loose, gently pull it off. You should now see the cartridge behind the handle.

Tub & Shower Handle Removal

Moen's tub & shower handles have two separate controls for hot and cold water. The process for removing these handles is quite similar to the cross handle removal.

AD

Begin by turning off the water supply. Using the removal tool, release the set screws on each handle. Next, carefully unscrew each handle using channel lock pliers. Take care not to damage the finishes. Once both handles are loose, pull them off gently.

Removing the Cartridge

With the handle(s) off, you'll see the cartridge behind it. Removing the cartridge requires a little more effort.

Release the Locking Tab

Locate the locking tab at the base of the cartridge. Using a flathead screwdriver, gently releasing the tab by slowly prying it upwards. Be careful not to break it.

AD

Once the tab is released, the cartridge should be free to move. Gently pull the cartridge out. If it's stuck, wiggle it a bit to loosen it up. If the cartridge is old or stuck due to mineral buildup, you may need to use pliers to remove it, but be cautious not to damage it.

Inspect and Replace or Clean the Cartridge

After removing the cartridge, inspect it for signs of wear or damage. If it's not worn, simply cleaning it may resolve any shower issues. If necessary, replace the cartridge with a new one before reinstalling.

Before reinstalling, it's a good idea to wrap the pipe threads with a towel to protect them from damage. Then, carefully slip the cartridge back into place. Reattach the handle(s) and secure them with the set screws using your fingers (or a gentle touch with the tool). Turn the water supply back on and test your shower.

AD

Mastering how to take off a Moen shower handle opens up a world of DIY repairs and upgrades. With patience and the right tools, you're well on your way to tackling more projects around the house. Happy fixing!

AD