how to take apart shower handle

Step-by-Step Guide: How to Take Apart a Shower Handle

By Kevin Brown
AD

Taking apart a shower handle can be a daunting task, but it doesn't have to be. With the right knowledge and tools, you can learn how to take apart a shower handle like a pro. Whether your shower handle is broken, or you're just looking to update the hardware in your bathroom, this step-by-step guide will walk you through the process safely and effectively.

Before you begin, gather your tools. You'll need a screwdriver (usually a Phillips head, but check your handle first), an adjustable wrench, a spray bottle with water or lubricant, and rags or washcloths for wiping. Once you're prepared, let's dive into the steps.

Preparation and Initial Disassembly

Your first step is to prepare your shower handle for disassembly. This involves ensuring the water supply is turned off and the handle is in a safe and accessible position. Typically, this will mean turning off the water valves under your sink, both hot and cold, and then releasing any remaining water pressure by turning the handle.

AD
How to Remove Shower Handle Sans Screws: DIY Guide
How to Remove Shower Handle Sans Screws: DIY Guide
a person is fixing a bathroom faucet with red handles and levers on the wall
a person is fixing a bathroom faucet with red handles and levers on the wall
Replace/Upgrade your Shower and Bath Handle
Replace/Upgrade your Shower and Bath Handle

Next, use a spray bottle to lightly mist the handle mechanism. This will help to loosen any dried-out grease or lubricant, making the disassembly process smoother. Let the lubricant soak for a few minutes before proceeding.

Accessing the Handle Screw

The next step is to access the screw that holds the handle onto the valve stem. This involves removing the handle's decorative top, usually a simple task of unscrewing a cap, popping off a plate, or removing a set screw. Sometimes, you may need to unscrew a set screw using your screwdriver.

How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Replace Two-Handle Shower Valve? | Replace Two-Handle With Showers
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide

If you're working with an older handle, the screw might be rusty or stripped. In this case, you might need to use a deep well socket or a center punch to extract it. Be patient and don't force it, as this could damage the valve or your tools.

Removing the Handle

Now that you've exposed the stem, you can carefully remove the handle. Using your adjustable wrench, grab the valve stem and turn the handle counterclockwise. You might need to use some force, but be cautious not to break the stem. If the stem breaks, it can be difficult and expensive to repair.

AD

Once the handle is removed, you'll see the valve stem. This is the metal piece connecting the handle to the valve. It's often covered in a jumble of wires and springs. Don't worry, you don't need to remove all of that just yet.

Disconnecting the Valve Stem from the Valve Body

Now that the handle is removed, it's time to disconnect the valve stem from the valve body. This process often involves disengaging the stem from the valve cartridge, which requires you to pull the stem down and pull it out.

Depending on your valve model, this might be as simple as pulling down on the stem and wiggling it out. However, if you're working with a delta-type cartridge, you might need to twist the stem counterclockwise as you pull down to release it.

AD

Handling the Cartridge

Once the stem is out, you'll see the cartridge. With some models, you can unscrew the cartridge from the valve body using an adjustable wrench. However, with others, the cartridge is sealed tight and needs to be replaced as a single unit.

If you're not replacing the cartridge and just want to clean or repair the handle, you can skip the rest of the disassembly process. However, if you're looking to replace the cartridge, continue to the next subtopic.

Replacing the Cartridge

If you're replacing the cartridge, it's important to note the orientation of the cartridge before removing it. The supply tube can be connected in different ways, and you'll want to reassemble it in the same orientation to ensure proper water flow.

AD

Using your adjustable wrench, turn the cartridge counterclockwise to loosen and remove it. If it's stuck, you might need to use pliers or a cartridge removal tool. Once the cartridge is out, you can clean the seat and prepare to replace it with a new one.

And there you have it! You've successfully taken apart your shower handle and, if necessary, replaced the cartridge. Disassembly can seem intimidating, but with the right tools and knowledge, it's a task well within your capabilities. Just remember to be patient and take your time, and you'll have your shower back in working order in no time.

AD