how to take apart samsung refrigerator drawers

Disassemble Samsung Refrigerator Drawers Step-by-Step

By Steven Moore
AD

Ever found yourself struggling with a Samsung refrigerator drawer that won't budge? It might not be broken; it might just need a good clean or simple adjustment. Taking apart Samsung refrigerator drawers can help you identify and fix these issues. Here's a step-by-step guide to help you.

Before we dive in, ensure you've unplugged your refrigerator from the power source to avoid any electrical accidents. Also, lay out a towel or sheet to catch any small parts that might fall.

Gathering Your Tools and Understanding Your Refrigerator

First things first, you'll need a few tools for this job. Grab a flathead screwdriver, a socket wrench, and maybe a pair of needle-nose pliers. Understand that Samsung refrigerators have a few different drawer systems, so your specific model might require slightly different steps. For this guide, we'll focus on French door and side-by-side models.

AD
Samsung Refrigerator - How To Take Apart Drawer for Cleaning
Samsung Refrigerator - How To Take Apart Drawer for Cleaning
How To Remove Freezer Drawer Samsung – Storables
How To Remove Freezer Drawer Samsung – Storables
Samsung refrigerator drawer disassembly for cleaning (Model #RF31FME)
Samsung refrigerator drawer disassembly for cleaning (Model #RF31FME)

The drawers have a few main parts: the drawer itself, the slides that allow it to move in and out, the door at the front, and the accessories like CrisperDrawers™ or Freshness Zones™. Let's start by taking apart the basic sliding mechanism.

Disconnecting the Electric Parts

If your refrigerator has features like lights or adjustable temperature controls on the drawer, you'll first need to disconnect these electrical components. Locate and carefully disconnect the wire harness from the bottom of the drawer. If the drawer has controls, you might need to remove a panel at the back to access the wires.

How to Remove Samsung Refrigerator Shelf without BREAKING it!
How to Remove Samsung Refrigerator Shelf without BREAKING it!
How To Remove A Samsung Freezer Drawer (without damaging your freezer) - Check Appliance
How To Remove A Samsung Freezer Drawer (without damaging your freezer) - Check Appliance

For some models, you might find it easier to first slide the drawer out as far as it will go, then tilt it upward slightly to gain better access to the underside. Be gentle to avoid damaging any components.

Removing the Drawer Tracks

Now, let's take apart the drawer's sliding mechanism. Most Samsung refrigerator drawers use either full-extension drawer slides or undermount slides. Full-extension slides have two parts: the inner slide that's attached to the drawer and the outer slide that's attached to the cabinet. Undermount slides are one piece and mount under the drawer.

AD

To remove the slides, look for mounting screws or rivets. You'll typically find these at the front and back of the slide. Using your screwdriver or socket wrench, remove the screws or punch out the rivets. For rivets, you might need to use a rivet setter to reinstall them later. Once the screws are off, the slide should simply pull out.

Taking Apart the Refrigerator Drawer

With the slides off, you should now be able to easily remove the drawer itself. If you're having trouble, you might still have some screws holding it in place. Look around the sides and bottom for any remaining fastenings.

Once the drawer is free, you can start to take apart the front door (if applicable) and any internal accessories. The door is usually held on by screws, so use your screwdriver to remove these. For accessories like CristperDrawers™ or Freshness Zones™, consult your user manual for specific removal instructions.

AD

Cleaning and Inspecting the Drawer and Slides

Now that you have your drawer and slides disassembled, it's time to clean them. Use a mild soap and water solution to clean both components, being careful not to soak any electrical parts. Inspect the slides for any debris that could be causing your drawer to stick. Also, check the wheels or bearings on the slide for smooth operation.

If your slides are worn out or damaged, it might be time to replace them. Samsung offers a variety of replacement slides, so check their website or consult your user manual for the right fit.

Reassembling and Final Touches

Now that you've cleaned and inspected your components, it's time to put everything back together. Start by reattaching the slides to the drawer and cabinet. Make sure they're properly aligned and secured with the correct screws or rivets.

AD

Reattach the drawer front door, if applicable, then plug your refrigerator back in. Test the drawer to ensure it slides in and out smoothly. If your drawer still sticks or doesn't close properly, you might need to adjust the door hinge or the slide itself. For this, consult your user manual or contact Samsung customer service.

And there you have it! You've successfully taken apart, cleaned, and reassembled your Samsung refrigerator drawer. With a little elbow grease and the right tools, you can tackle this maintenance task with ease. Happy DIYing!

AD