how to take apart insinkerator garbage disposal

Step-by-Step Guide: How to Take Apart an Insinkerator Garbage Disposal

By Matthew Anderson
AD

Tackling a clogged or poorly performing InSinkErator garbage disposal can be a daunting task. However, disassembling this indispensable kitchen appliance to fix or clean it can be surprisingly simple. With the right tools and careful guidance, you'll be well on your way to restoring your InSinkErator's functionality in no time. Let's navigate this step-by-step guide on how to take apart an InSinkErator garbage disposal.

Before proceeding, ensure you have the necessary tools and safety measures in place. You'll need an adjustable wrench, a flathead and Phillips screwdriver, a putty knife, and work gloves. Safety first! Turn off and unplug the power supply to your garbage disposal. Disconnect the drainpipe below and following the disposal's feeding tube to prevent any mishaps.

The Disassembly Process

The disassembly process involves several key components. Let's break down each step systematically.

AD
Troubleshoot Your Garbage Disposal with This Step-by-Step Guide - Fixes for Common Issues Revealed!
Troubleshoot Your Garbage Disposal with This Step-by-Step Guide - Fixes for Common Issues Revealed!
How a Garbage Disposal Works - InSinkErator
How a Garbage Disposal Works - InSinkErator
What Happens If You Leave A Garbage Disposal On?
What Happens If You Leave A Garbage Disposal On?

Begin by disconnecting the disposal from its mounting hardware. Use an adjustable wrench to loosen and remove the large mounting bolts that secure the disposal to the sink. Prepare to catch any debris or old plumber's putty, as this step may reveal a mess accumulated over time.

Removing the Top Mounting Assembly

Once the mounting bolts are removed, carefully prize off the top mounting assembly. It may take some force, so consider using a putty knife to pry it loose. This assembly includes the Splash Guard and the stoppers that allow the disposal to connect to your sink's pipework.

How to Replace a Garbage Disposal (Easy DIY Steps)
How to Replace a Garbage Disposal (Easy DIY Steps)
How to Remove A Garbage Disposal, Repair and Re-Install
How to Remove A Garbage Disposal, Repair and Re-Install

To fully remove the top mounting assembly, you'll need to disconnect the wiring harness connecting the disposal to the electrical supply. Pull this harness away from the motor housing gently, ensuring you don't damage any wires. Be wary of any remaining screws or brackets at this stage, as they may still impede the removal of the assembly.

Accessing the Motor Housing

With the top mounting assembly removed, you'll see the motor housing unit underneath. The motor housing is typically secured by three screws. Use a Phillips screwdriver to remove these, then gently lift the housing off the unit's central shaft. This shaft rotates the impeller plate inside the grinding chamber, and its free rotation will allow you to remove the motor housing safely.

AD

After lifting off the motor housing, you'll gain access to the grinding chamber's internal components. Be mindful of any residue or waste that may have accumulated in the grinding chamber. Use gloves and avoid unnecessary contact, as this area may contain harmful bacteria or sharp edges.

Internal Components: Impeller and Turntable

Having exposed the grinding chamber, you'll next encounter the impeller and turntable assembly. This is the workhorse of your garbage disposal, consisting of the impeller (the rotating plate with sharp teeth) and the turntable (the non-rotating base supporting the impeller).

The impeller and turntable assembly is often secured by a setscrew. Locate this screw, usually found on the underside of the turntable, and remove it using an adjustable wrench. Once loosed, the impeller and turntable can be separated, revealing the grinding chamber's interior.

AD

Cleaning or Replacing the Impeller and Turntable

With the impeller and turntable separated, you can now clean or replace either component as needed. Regular cleaning may be sufficient to restore your disposal's functionality, while replacing an impeller or turntable might be necessary if they exhibit signs of damage or excessive wear.

To clean, use a mixture of hot water, dish soap, and white vinegar to scrub the components thoroughly. Ensure you remove any remaining organic material, as this can lead to unpleasant odors and further buildup. After cleaning, allow both components to dry completely before reassembling your garbage disposal.

Reassembly and Final Checks

Carefully follow these steps in reverse to reassemble your InSinkErator garbage disposal. Ensure each component is correctly aligned and secured, and don't forget to reconnect the electrical supply and plumbing pipes.

AD

Before turning on the power supply, run water through the disposal for a few seconds to ensure it's functioning correctly. Listen for any grinding or unusual noises, and check for leaks from the mounting assembly or plumbing connections.

Congratulations, you've successfully disassembled, cleaned, or repaired your InSinkErator garbage disposal! Regular maintenance and a keen eye for signs of trouble will help prolong the life of this essential kitchen appliance and keep your sink running smoothly. Happy maintenance!

AD