How to Disassemble Dyson Animal
ревалент в handler to take apart your Dyson Animal Vacuum? From disassembling the machine for a deep clean to replacing worn-out parts, we've got you covered. Let's dive right into this step-by-step guide.
Before you start, ensure you've unplugged your vacuum and allowed it to cool down if it's been in use. Also, gather your tools - a flathead screwdriver, a T10 Torx screwdriver, and a pair of pliers may come in handy. Now, let's get started.
Disassembling Your Dyson Animal for a Deep Clean
Once a year, it's a good idea to deep clean your Dyson Animal. This involves removing and cleaning the filter and emptying the hygienic dirt ejector.
Before proceeding, make sure your vacuum is on a flat surface and the bin is empty.
Removing the Filter
The pre-motor filter in your Dyson Animal is located behind the clear cover on the machine's handle. To remove it, pull the cover off and slide the filter out.
Once removed, tap the filter gently to dislodge any dust. If it's not too dirty, you can rinse it under lukewarm water, let it dry for 24 hours, and reuse it. Otherwise, replace it with a new one.
Clearing the Hygienic Dirt Ejector
The dirt ejector is the blue button on the top of the bin. To empty it, press the button and slide the open bracket across to release the compressed dirt. Hold the vacuum over a dustbin and pull the slider towards you.
Once emptied, use a soft brush to clean any remaining dirt from the ejector. Ensure it's fully dry before reinserting the slider.
Replacing the Wand and Brush Bar on Your Dyson Animal
Over time, the brush bar and wand on your Dyson Animal may wear out. Here's how to replace them.
First, remove the wand and brush bar assembly by pressing the release button on the main body of the vacuum and sliding the wand out.
Replacing the Brush Bar
To remove the brush bar, unscrew the cincinatti-style nut at its base using a T10 Torx screwdriver. Then, slide the brush bar out of the wand.
Insert the new brush bar into the wand, ensuring the yellow foot is facing the right way. Replace and tighten the cincinatti-style nut. The brush bar should now spin freely when the vacuum is turned on.
Replacing the Wand
If you need to replace the wand, locate the grey trigger for the wand release mechanism. Pull back the trigger and hold it in the 'on' position.
While holding the trigger, unscrew the wand from the main body of the vacuum using a flathead screwdriver. Fit the new wand onto the vacuum, ensuring it's fully screwed in, and release the wand release trigger.
That's it! You've now successfully taken apart your Dyson Animal for a deep clean and replaced worn-out parts. Regular maintenance like this will keep your vacuum Performing at its best. Happy cleaning!