how to take apart altec lansing speakers

Disassemble Altec Lansing Speakers: Step-by-Step

By Nicole Lee
AD

Delving into the world of speaker repair? Trying to breathe new life into your beloved Altec Lansing speakers? Taking apart your speakers can be a rewarding task, allowing you to learn the inner workings of these audio marvels. Whether you're troubleshooting issues or simply curious about the components, this comprehensive guide walks you through the process of disassembling your Altec Lansing speakers. Let's embark on this audio adventure together.

Understanding the basics before you begin is crucial. Altec Lansing speakers come in various shapes and sizes, but many follow a similar internal structure. Familiarize yourself with common speaker components: the woofer, midrange, tweeter, crossover, and enclosure. Gather your tools - a Phillips or flathead screwdriver, depending on your speaker's screws, and possibly a putty knife for prying. Pro tip: take photos as you dismantle to aid reassembly.

Preparation and Initial Disassembly

Before you start, ensure your speakers are unplugged and any batteries are removed. Work in a well-lit, spacious area to avoid misplacing tiny components. Have a towel or tray ready for components to prevent loss or damage. Most speakers have their grilles secured by clips or screws - remove these first.

AD
HOW TO TAKE APART ALTEC LANSING BOOMJACKET SPEAKER
HOW TO TAKE APART ALTEC LANSING BOOMJACKET SPEAKER
How to Pair Altec Lansing Speaker with Android, iOS & Windows
How to Pair Altec Lansing Speaker with Android, iOS & Windows
Great Plain Acoustics drivers and speakers where Altec Legend Lives on
Great Plain Acoustics drivers and speakers where Altec Legend Lives on

Altec Lansing speakers often have their grilles held by clips. Carefully pry the grille off, using a fingernail or a flathead screwdriver. If your speakers have screws, unscrew them carefully, storing them safely. Set the grilles and accompanying hardware aside.

Removing the Speaker Cone

With the grille off, you'll see the speaker cone, which might pop out when you press the center. Be gentle, as pushing too hard can damage the cone or voice coil. Sometimes, you'll need to unscrew the cone, or the speaker might be a 2-way or 3-way, featuring multiple cones. Take note of their configuration for reassembly.

a man working on an electrical device in a room with unfinished walls and flooring
a man working on an electrical device in a room with unfinished walls and flooring

For suspended cones, carefully cut the adhesive around the edge, then lift the cone out. The adhesive can be tough, so take your time to prevent damaging the cone. If the cone is stubborn, try warming the adhesive with a hairdryer. For cone removal in sealed enclosures, proceed with caution - you might need to puncture the seal and void your warranty.

Accessing the Crossover and Terminals

With the cones removed, the crossover and terminals should be exposed. Unfasten the crossover from its housing - it might be glued or screwed in place. Some crossover boards have legs or tabs, making removal easier. Others might require clippers to snip the legs, but be cautious not to damage the board.

AD

Next, disconnect the speaker wires from the terminals. They're usually connected via screws or spring-loaded clamps. Unscrew or gently release the clamps, then pull the wire out. If the wire is soldered, you might need a soldering iron and appropriate skills to disconnect it. Always exercise extreme caution when working with electrical components.

Deconstructing the Enclosure

The enclosure is the speaker's cabinet, containing the internal structure. For most Altec Lansing speakers, removing screws will do the trick. If your enclosure is securely sealed, breaking it might be the only option. Proceed with caution, asenaar warranty and potential damage to components.

Begin by removing screws from the sides, top, and bottom. As you uncover more of the enclosure, you might find additional components - be gentle and careful not to damage them. Once all screws are removed, separate the enclosure pieces. Older speakers might have the sides and back held together by glue, requiring more involved disassembly.

AD

Exploring the Internal Components

With the enclosure apart, you'll find the speaker's heart: the voice coils, magnets, and any additional drivers. Remove these components carefully, keeping track of their orientation. Voice coils can be delicate, so handle them with care. If you're unsure about any components, seek advice from an expert or forums like Audioholics or Crutchfield's support.

As you explore the speaker's interior, you might find dust, debris, or screws lurking in dark corners. Use a damp cloth or small vacuum to clean the area, ensuring no dust enters the voice coil. Remove any remaining screws or clips, freeing the components within. You've now successfully disassembled your Altec Lansing speakers!

Congratulations on your successful speaker deconstruction! Now that you've explored the inner workings of your Altec Lansing speakers, you're better equipped to troubleshoot issues, upgrade components, or simply appreciate the craftsmanship. Happy tinkering, and remember: always prioritize safety when working with electrical components. Who knows – you might just breathe new life into your old speakers, reviving your audio prowess.

AD
AD