how to take apart a swiffer wet jet

How to Disassemble Swiffer WetJet Step by Step

By Christopher Wilson
AD

Have you ever wondered how to disassemble a Swiffer WetJet for cleaning or replacement purposes? While Swiffer WetJets are designed for easy use, they are not always intuitive to take apart. Fear not! In this comprehensive guide, we will walk you through the process, ensuring you understand each step. Let's dive in and explore how to take apart your Swiffer WetJet with ease.

Before we begin, it's crucial to have a few tools on hand: a Phillips #2 screwdriver, pliers, and a steady hand. Remember, always prioritize safety, and never force any parts. If something doesn't budge, you might be turning the wrong way or missing a step. So, let's get started!

Preparation and Initial Disassembly

Begin by unplugging your Swiffer WetJet from the power source and emptying any remaining solution from the reservoir. Next, ensure the floor head is detached by pressing the unlock button and sliding it off the machine.

AD
Changing the Batteries on a Swiffer Wet Jet
Changing the Batteries on a Swiffer Wet Jet
How to Assemble a Swiffer WetJet: Step-By-Step Guide
How to Assemble a Swiffer WetJet: Step-By-Step Guide
DIY Wet Jet Pads & Refill Solution
DIY Wet Jet Pads & Refill Solution

Now that we're ready, let's tackle the main body. Grab your Phillips #2 screwdriver and locate the four screws on the bottom of the machine. Remove these screws and set them aside in a safe place, ensuring you don't lose them.

Separating the Bottom and Top Casings

With the screws removed, carefully disconnect the cord from the bottom casing by pressing the release tab and pulling it out. Next, gently pry apart the bottom and top casings, starting at one corner and working your way around. You should feel the casings separate, revealing the inner workings of your WetJet.

Swiffer Wet Jet Refills – How To Save Money By Making Your Own Homemade Cleaning Solution! - Surviving The Stores™
Swiffer Wet Jet Refills – How To Save Money By Making Your Own Homemade Cleaning Solution! - Surviving The Stores™
Unclogging a Swiffer Wet Jet
Unclogging a Swiffer Wet Jet

Before proceeding, take a moment to familiarize yourself with the internal components. You'll see a motor, gear assembly, and a circuit board. Don't worry; we won't be touching these parts. They are securely fastened and should remain untouched during this process.

Disconnecting the Electronics and Nozzle Assembly

Using your fingers or a pair of pliers, carefully disconnect the electrical connectors running between the top casing and the circuit board. These connectors power the solution dispenser button and the light indicator. Gently pull the connectors away from the circuit board, ensuring you don't damage any wires.

AD

Now, let's remove the nozzle assembly. Look for two plastic clips holding the nozzle in place on the bottom casing. Using your fingers or small pliers, carefully pry these clips apart, releasing the nozzle from the bottom casing. You might need to work at these clips gently to release them. Once removed, set the nozzle aside for later reassembly.

Removing the Solution Reservoir

With the nozzle assembly out of the way, it's time to tackle the solution reservoir. First, locate the small tab on the underside of the reservoir, near where it connects to the bottom casing. Press and hold this tab while simultaneously pulling the reservoir out of the casing.

As you pull, you'll feel the reservoir disconnect from the solution dispenser mechanism. Once fully disconnected, set the reservoir aside. You'll notice that it's still attached to the solution dispense button via a thin, flexible tube. We'll deal with this connection later.

AD

Diasembling the Solution Dispenser Mechanism

With the reservoir removed, it's time to take apart the solution dispenser mechanism. Locate the small gear at the top of the mechanism, near the solution dispense button. Using your screwdriver, gently pry this gear off its shaft. You might need to use a bit of force, but remember, be patient and persistent, but never forceful.

Once the gear is removed, the solution dispense button should pop off its mount. You can now separate the mechanism's casing by prying it apart, just as you did with the main body casings earlier. As you separate the casing, the spring-loaded solution delivery tube will become visible. Set the casing aside, as we won't be dealing with it further.

Disconnecting the Solution Delivery Tube

Finally, we need to disconnect the solution delivery tube from the solution reservoir. These tubes are typically connected via a small plastic locking tab. Carefully squeeze the sides of the locking tab using your pliers, and gently pull the tube out of the reservoir.

AD

And there you have it! You've successfully disassembled your Swiffer WetJet. Now you can clean or replace any problematic parts with ease. When you're ready to reassemble your machine, simply follow these steps in reverse, taking care to reconnect all electrical components securely and snap the casings back together. Always ensure that all parts are properly aligned and securely fastened during reassembly.

As a final note, it's essential to always prioritize safety when working with electrical appliances. Always unplug the machine before disassembly, and never attempt to repair or replace components if you're unsure about any aspect of the process. If in doubt, consult a professional or contact Swiffer's customer support for further guidance.

AD