how to take apart a kohler kitchen faucet

How to Disassemble a Kohler Kitchen Faucet: Step-by-Step Guide

By Joshua White
AD

Attempting to dismantle your Kohler kitchen faucet might seem daunting, but with the right steps and a bit of patience, you can perform this task like a pro. Learning how to take apart a Kohler kitchen faucet can save you money and time, allowing you to troubleshoot and repair minor issues without calling a professional plumber.

Before you begin, gather your tools. You'll need an adjustable wrench, needle-nose pliers, an Allen wrench set, a screwdriver, and alesh adjustment wrench. Also, be sure to have a rag or towel on hand to protect your countertops and catch any drips or debris.

Preparing to Take Apart Your Faucet

The first step in taking apart your Kohler kitchen faucet is turning off the water supply. Locate the supply valves under your sink and turn them clockwise until they stop. Check for any leaks; if there are none, you're ready to proceed.

AD
How To Fix A Leaky Double-Handle Kitchen Faucet?
How To Fix A Leaky Double-Handle Kitchen Faucet?
How To Replace A Kitchen Faucet - For Newbies! - Anika's DIY Life
How To Replace A Kitchen Faucet - For Newbies! - Anika's DIY Life
How to Take Apart a Kohler Faucet
How to Take Apart a Kohler Faucet

Next, prepare your workspace. Place a bucket or bowl under the faucet to catch any water remaining in the lines. Turn on the faucet and let it run until the water stops. This step helps drain the system and makes the disassembly process easier.

Removing the Handle

Begin by unscrewing the setscrew on the handle's faceplate using an Allen wrench. This screw secures the handle to the faucet's body. Once you've removed the setscrew, use needle-nose pliers to pull out the handle sleeve.

How to Replace a Kitchen Faucet - HandyManHowTo
How to Replace a Kitchen Faucet - HandyManHowTo
How To Fix Low Water Pressure In Kitchen Sink
How To Fix Low Water Pressure In Kitchen Sink

With the handle sleeve removed, lift off the handle and set it aside. You should now see the faucet's internal parts, which will vary depending on the model and age of your Kohler faucet.

Accessing the Cartridge or Assembly

The next step in dismantling your Kohler kitchen faucet involves removing the faucet body cap, which protects the cartridge or internal assembly. To do this, use an adjustable wrench to loosen and remove the escutcheon (the decorative ring around the base of the faucet).

AD

With the escutcheon removed, you'll see the body cap. Unscrew this cap using your hands or needlenose pliers, revealing the cartridge or internal assembly. If you have an older model with a ball assembly, you'll need to remove the cam assembly first, which involves unscrewing the cam washer and then the cam itself.

Disassembling the Internal Parts

With the cartridge or assembly exposed, you can now start disconnecting the internal parts of your faucet. If you have a cartridge faucet, use channel-lock pliers to turn and remove the cartridge. If you have a ball assembly, remove the ball retainer (sometimes called a "top cap") by unscrewing it. Then, grasped the ball and lift it out, along with the cam assembly.

Inspect the internal parts for signs of wear, corrosion, or damage. If you find any issues, consider replacing the affected parts when reassembling your faucet.

AD

Removing the Inlet Stems and Water Supply Lines

Before you remove the faucet from its base, you'll need to disconnect the water supply lines. Use an adjustable wrench to loosen and remove the nuts securing the supply lines to the faucet's base.

With the nuts removed, lift the faucet's base away from the supply lines, allowing them to hang freely. If your faucet has inlet stems, unscrew them using a screwdriver or an adjustable wrench. Set the inlet stems and supply lines aside, keeping track of their original positions, as these can vary depending on the model and configuration of your faucet.

Removing the Faucet Base

To remove the faucet base, you might need to use a leash adjustment wrench or channel-lock pliers to turn and remove the faucet's retaining nut. Once the nut is removed, lift the faucet base out of the mounting hole in your countertop or sink.

AD

If you encounter any resistance, gently tap the faucet base with a soft mallet to break the seal and help it slide out. With the faucet base removed, you can now address any repair work, or simply proceed with re-assembling your faucet if no issues were found.

When taking apart a Kohler kitchen faucet, remember to work patiently and carefully, keeping track of each part as you remove it. By following these steps and organizing the disassembled parts, you'll make the reassembly process much smoother. Happy repairing!

AD