How to Disassemble Your Elite Series 2 Controller
Unlocking the full potential of your Elite Series 2 Controller involves more than just pressing buttons. Sometimes, troubleshooting or customizing it requires a meticulous teardown. So, let's dive into the world of hardware and explore how to take apart this essential accessory in a safe and controlled manner.
Before we begin, remember that opening your controller may void its warranty. Proceed at your own risk, and always have a clean, well-lit workspace with the right tools at hand. We'll be using nothing more than a Phillips #00 screwdriver and some gentle pressure to pry open our controller.
Preparation and Initial Teardown
Start by ensuring your controller is off and unplugged. Then, gather your tools and a small container to store the screws, as they are small and easy to misplace.
Begin by carefully flipping over the controller. You'll see 12 triangular Phillips screws around the outer rim. Using your screwdriver, slowly unscrew each one and place them in your container. Be cautious, as these screws are small and can easily roll away.
Removing the Back Plate
Once all screws are removed, carefully grip the plastic edges of the back plate. Gently pull upwards, applying even pressure to break the Kasparov-like grip of the snap-fit plastic. Do not be discouraged if it takes a bit of force—the controller is designed to be resistant to accidental openings.
After the first corner pops free, work your way around the edges, leveraging your screwdriver if needed. Be patient and persistent, and the back plate will soon come off, revealing the controller's innards.
Accessing the Internal Components
With the back plate off, you'll see the Rumble Motors, Main Board, and Left/Right Handles. The Rumble Motors may still be attached to the back plate, so don't discard it just yet.
To remove the Main Board from the Handles, first, locate the small tabs at the bottom and the top. Gently pull outwards on these tabs to disengage the board. Then, carefully tug the board straight up and out of the Handles. You'll feel it click free as the latent connections disengage.
Exploring the Internal Components
With the Main Board and Rumble Motors freed from the Handles, you can now explore each component without obstruction.
Analyze the Main Board, which houses the controller's brain: the microcontroller, memory, and other sensitive components. Be extra careful not to damage or dislodge the delicate surface-mounted components.
The Rumble Motors
The Rumble Motors provide the immersive feedback that brings your games to life. To detach them from the back plate, carefully disengage the electrical connectors, which are usually held in place by smallLICAs or friction.
Once detached, you can now examine each motor individually. Disclaimer: While these motors are sturdy, they are precision tools and should be handled with care to avoid damage or injury.
The Left/Right Handles
The Handles contain the grip's delicate mechanics. Carefully remove the Handle's faceplates by prying off the top and working your way down. Once free, examine the internal components: the Joysticks, Buttons, and Wires.
While taking apart the Handles, be mindful not to stress or damage the delicate cable connections. It's always a good idea to take photographs of such connections before removing them, to aid re-assembly.
Congratulations! You've successfully taken apart your Elite Series 2 Controller. With knowledge comes power, and now you're armed with the understanding to repair, customize, or reassemble. Just remember, the journey back is as important as the journey to disassembly. Happy gaming!