how to string a homelite weed eater with two holes

Mastering Homelite Weed Eater: String Two-Hole Model

By Brian Martinez
AD

Stringing a Homelite weed eater with two holes might seem daunting at first, but with the right guide, it's a breeze. We've compiled this comprehensive guide to help you through the process, ensuring your Homelite weed eater remains in top condition.

Whether you're a first-time user or a seasoned pro, understanding your weed eater's components is key. Today, we'll focus on the process of stringing, addressing common misconceptions and providing step-by-step instructions tailored to Homelite weed eaters with two holes.

Understanding Your Homelite Weed Eater's Components

Before we dive into the stringing process, let's familiarize ourselves with the key components of your Homelite weed eater. The two most important components are the spool (or head) and the string (line or filament). The spool houses the string and is responsible for feeding it out during use.

AD
HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
How To Restring A Weed Eater - Hunker
How To Restring A Weed Eater - Hunker
String trimmer weed eater wacker will not start, diagnosis and EASY repair fix free!
String trimmer weed eater wacker will not start, diagnosis and EASY repair fix free!

Your Homelite weed eater comes with either a single-line or a dual-line (two holes) model. Today's guide focuses on the latter, which uses two strings to cut weeds. Each string is wound around the spool and fed through one of the two holes in the underside of the spool.

Identifying the Spool and[String Holes

The spool is the circular component at the end of your weed eater's shaft. It's usually plastic and houses the string. If your weed eater has two holes on the underside of the spool, you have a dual-line model. These holes feed the two strings through the spool and out the bottom, allowing for better cutting and maneuverability.

To confirm you have a Homelite weed eater with two holes, compare your model with images of dual-line Homelite weed eaters online. The subtle differences in design can help you identify your specific model and ensure you're using the correct guide.

Choosing the Right String

Correctly identifying your Homelite weed eater's model is only the first step. You also need to choose the right string for your weed eater. Homelite recommends using their official line replacement for best results. However, many users have found other brands like Craftsman or Oregon to work just as well.

AD

When choosing a string, consider the following:

  • Diameter: Homelite weed eaters typically use 0.065" or 0.080" strings. Ensure you choose the right size for your model.
  • Material: Most strings are made from either nylon or:texture, each with its own advantages.
  • Length: A 200-foot spool is usually sufficient, but longer spools may be available.

Preparing to String Your Homelite Weed Eater

Before you start, ensure your weed eater is powered off and cooled down. Always prioritize safety when handling your tool. Also, gather all necessary tools and components:

  • New string (ensure it matches your weed eater's model and recommended specifications)
  • Scissors or line cutters
  • Pen or pencil
  • Ruler

Measuring the String

Before cutting the new string, measure the length you'll need. Homelite recommends starting with 50 feet of line for each hole. The exact length may vary depending on your model, so always double-check your manual.

AD

Using a pen or pencil and a ruler, mark the length you need on the new string. Then, use scissors or line cutters to cut the string at the mark. It's better to cut the string too long initially, as you can always trim it later.

Threading the String

Once you've cut the string, it's time to thread it through the spool. Begin by feeding one end of the string through one of the holes in the underside of the spool. It doesn't matter which hole you start with.

Next, wind the string around the spool. Ensure you wind evenly and smoothly, keeping the string as taut as possible. Once the 50 feet are wound up, pull the remaining string through the hole on the other side of the spool, leaving a 3- to 6-inch tail.

AD

Installing the Spool

With the string wound and ready to go, it's time to reinstall the spool onto your Homelite weed eater. Ensure the string is properly aligned with the guide holes on the underside of the spool.

Carefully slip the spool onto the shaft of your weed eater, ensuring it's fully seated. The string should now be ready for use. Turn on your weed eater and let it feed out the appropriate length of string automatically.

Trimming the String

Once your weed eater has fed out the correct length of string, turn it off and trim the excess. Homelite recommends trimming the outer string to about 12 inches. This length provides enough string for effective cutting while minimizing waste.

Using scissors or line cutters, carefully trim the excess string. Work slowly to avoid making the string too short. Once you've trimmed the string, your Homelite weed eater is ready for use.

Regularly maintaining your Homelite weed eater, including replacing the string as needed, will help ensure its longevity and performance. Don't forget to always prioritize safety when using and maintaining your weed eater.

AD