how to string a hyper tough weed eater

Mastering String: Hyper Tough Weed Eater

By Hannah Garcia
AD

When it comes to maintaining a well-groomed lawn, a reliable weed eater is an essential tool. However, even the toughest strings can break or wear down over time, requiring you to string a hyper tough weed eater. Here's a comprehensive guide to help you through the process.

Before we dive in, it's crucial to understand that not all weed eaters are the same. Some use a single line, while others use a dual line. Additionally, some models have a bump feed head, while others use a fixed line. This guide will cover both types, ensuring you can string your weed eater with ease.

Understanding Your Weed Eater

Before you start, identify your weed eater's type and the line it uses. Most weed eaters use either a 0.065" or 0.080" line. Some high-performance models may use a 0.095" line. Knowing your line size ensures you buy the right replacement.

AD
HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
How to reload restring Hyper Tough (Walmart) 20V battery trimmer weed eater
How to reload restring Hyper Tough (Walmart) 20V battery trimmer weed eater
How to fix weed eater starter recoil spring & pull string.
How to fix weed eater starter recoil spring & pull string.

Next, check if your weed eater has a bump feed head or a fixed line. A bump feed head requires you to bump the head on the ground to release more line, while a fixed line requires you to manually pull the line out.

Gathering Your Materials

Regardless of your weed eater's type, you'll need a few materials to string it properly:

  • Replacement line - Make sure it's the right size for your weed eater.
  • Scissors or a line cutter - To trim the excess line after stringing.
  • Patience - Stringing a weed eater can be a bit tricky, so take your time.

Stringing a Single Line Weed Eater

Single line weed eaters are straightforward to string. Here's how:

  1. Unscrew the spool cap on the side of your weed eater. You may need a screwdriver for this.
  2. Cut a length of line roughly 10-12 feet long. Feed the end of the line through the hole in the spool, then pull it through the eyelet on the side of the weed eater's head.
  3. Wrap the line around the spool in the direction indicated by the arrow on the spool. Make sure to keep the line taut and even as you wrap.
  4. Once you've wrapped the line, pull it through the eyelet and cut it to the desired length. A good starting point is 12-16 inches.
  5. Screw the spool cap back on and you're ready to go.

Stringing a Dual Line Weed Eater

Dual line weed eaters have two lines that spin in opposite directions, creating a wider cut. Here's how to string one:

AD

Most dual line weed eaters have a bump feed head. If yours does, follow these steps:

  1. Unscrew the spool cap on the side of your weed eater.
  2. Cut two lengths of line, each roughly 25 feet long. Feed one end of each line through the two holes in the spool.
  3. Pull the lines through the eyelets on the side of the weed eater's head. The lines should cross over each other as they come out of the eyelets.
  4. Wrap one line around the spool in the direction indicated by the arrow, then wrap the second line around the spool in the opposite direction.
  5. Once both lines are wound onto the spool, pull them through the eyelets and cut them to the desired length. A good starting point is 10-12 inches for each line.
  6. Screw the spool cap back on. Now, you should be able to bump the head on the ground to release more line as needed.

If your dual line weed eater has a fixed line, simply insert the end of the line through the hole in the spool, pull it through the eyelets, and wind it onto the spool. Cut the line to the desired length and you're all set.

Testing Your Work

Before you start trimming, test your new line by turning on your weed eater. The line should spool out smoothly and evenly. If not, you may need to adjust your line or contact a professional for help.

AD

The next time you find yourself in the market for a new line, remember the tips in this guide. With a little patience and the right materials, you'll be able to string your hyper tough weed eater like a pro. Happy trimming!

AD