how to start atv with bad starter

Fixing a Bad ATV Starter: Expert Tips to Get You Going

By Emily Young
AD

Starting an ATV with a bad starter can be a frustrating experience, but it doesn't necessarily mean you'll have to tow your machine to the repair shop. There are several steps you can take, from troubleshooting to simple fixes, before calling in the professionals. This guide will walk you through the process, helping you identify the problem and potentially saving you time and money.

It's essential to ensure your safety first. Always wear protective gear when working on your ATV. Moreover, ensure the engine is cool before you start. Now, let's dive into the potential issues and solutions.

Understanding Your ATV Starter System

The ATV starter system comprises several components, including the starter motor, starter solenoid, and the wiring. Familiarizing yourself with these parts will help you diagnose and fix problems more effectively.

AD
| ATV Man
| ATV Man
ATV Prep Made Easy: 10 Steps to Kickstart Your Spring Adventures!
ATV Prep Made Easy: 10 Steps to Kickstart Your Spring Adventures!
No Spark China made ATV, Simple BMX 90cc Rewire and Cold Start!
No Spark China made ATV, Simple BMX 90cc Rewire and Cold Start!

Let's explore each component briefly:

  1. Starter Motor: This is the component responsible for turning the engine over. When it fails, it could be because of worn-out brushes, commutator, or armature.
  2. Starter Solenoid: This component acts like a switch, engaging the starter motor when you turn the ignition key.
  3. Wiring: The integrity of the wiring is crucial for the electrical current to flow from the battery to the starter motor.

Checking the Battery

Before anything else, check your ATV's battery. A weak or dead battery can mimic starter problems. Here's how:

ATV pull cord starting
ATV pull cord starting
Why Is My ATV Backfiring?
Why Is My ATV Backfiring?

Use a multimeter to test the battery's voltage. A fully charged battery should read between 12.6 to 13.2 volts. If it's lower, try charging or replacing it. If the battery is fine, proceed to the next steps.

Evaluating the Starter Motor and Solenoid

If the battery checks out, it's time to assess the starter motor and solenoid. Here's how:

AD
  1. Locate the starter motor, usually at the front of the engine, and the solenoid, often attached to it.
  2. Disconnect the wire from the solenoid, then turn the ignition key to engage the starter. If you hear a clicking sound, the solenoid is working. If not, it might be faulty.
  3. If the solenoid seems fine, reattach the wire and try starting the ATV. If it still doesn't turn over, the starter motor might be the problem.

Possible Solutions for a Bad Starter

Depending on your diagnosis, here are some solutions:

Replacing the Starter Motor

If the starter motor is the culprit, you'll need to replace it. It's a relatively straightforward process that involves:

  1. Disconnecting the negative battery cable.
  2. Detaching the starter motor from the engine and the solenoid.
  3. Removing the mounting bolts and pulling out the old motor.
  4. Installing the new starter motor and reversing the removal process.

Servicing the Starter Motor

Sometimes, a starter motor can be repaired. This involves:

AD

Disassembling the motor, replacing worn-out parts like brushes or commutator, and reassembling it. However, this requires a certain level of mechanical prowess and may not always be practical for a DIY fix.

Cleaning Corroded Contacts

Corrosion on electrical contacts can sometimes cause starting issues. Check the starter motor and solenoid connections for any signs of corrosion. If you find any, clean the contacts with an emery cloth or a wire brush.

Regular maintenance can help prevent starting issues. This includes checking your battery, cleaning the contacts, and lubricating the starter motor if necessary.

AD

However, if none of these solutions work, it might be time to call a professional or consult an ATV repair manual specific to your model.

Finally, always remember that safety comes first. Never work on your ATV unless you're comfortable with the task. When in doubt, consult a professional. Happy riding, and here's to hoping you're back on the trails in no time!

AD