how to jump start chevy hhr

Chevy HHR Jump Start Guide: Expert Tips & Tools

By Brian Young
AD

Having a dead battery in your Chevy HHR can be a frustrating experience. But don't worry, jump starting your car is a straightforward process, and with the right instructions, you can get back on the road in no time. This guide will walk you through the step-by-step process of jump starting a Chevy HHR.

Before we dive into the process, ensure you have a set of jumper cables and another vehicle with a fully charged battery. Always remember safety first; never attempt to jump start your vehicle if you or the car is wet, and keep the jump start procedure as quick as possible to minimize the risk of sparks.

Understanding Your Chevy HHR's Battery Location

The first step in jump starting your Chevy HHR is to locate its battery. The 2006-2010 models have their batteries located under the hood, on the driver's side. Once you've found the battery, you'll see the positive (+) and negative (-) terminals. The positive terminal is usually marked with a plus sign or the word "POSITIVE," while the negative terminal may be marked with a minus sign or the word "NEGATIVE."

AD
Chevy HHR Jump Start
Chevy HHR Jump Start
Chevy HHR Battery Replaced
Chevy HHR Battery Replaced
Top 5 Problems Chevy HHR SUV 1st Generation 2006-11
Top 5 Problems Chevy HHR SUV 1st Generation 2006-11

For models from 2011 onwards, the battery is also located under the hood, on the passenger side. Follow the same steps to identify the positive and negative terminals.

Preparing the Jump Start

Before connecting the jumper cables, ensure both vehicles are turned off and the keys are removed from the ignition. This safety measure prevents accidental starting of either vehicle during the jump start process.

How To Use A Portable Car Jump Starter
How To Use A Portable Car Jump Starter
2008 Chevy HHR Car review! Should you purchase it after 15 years?
2008 Chevy HHR Car review! Should you purchase it after 15 years?

Next, find a stable, non-metric position to place the jumper cables. The hood of the vehicle with the dead battery should be propped open, and you should have clear access to the battery. Have the functioning vehicle's hood open as well, to easily access its battery.

Connecting the Jumper Cables

Locate the positive (+) battery terminal on both vehicles. On your Chevy HHR's dead battery, connect one red jumper cable clamp to this positive terminal. Then, connect the other red clamp to the positive terminal of the functioning vehicle's battery.

AD

Now, locate the negative (-) battery terminal on the functioning vehicle's battery and connect one black jumper cable clamp to it. Warning: Do NOT connect the other black clamp to the negative terminal of your Chevy HHR's dead battery. Instead, find a metal grounding point on your HHR, such as a bolt or a metal part of the engine block, away from the carburetor and fuel system. Connect the second black clamp here.

Jump Starting Your Chevy HHR

With the jumper cables connected, start the engine of the functioning vehicle and let it run for a few minutes. This will provide power to your Chevy HHR's dead battery, allowing it to recharge slightly. After a couple of minutes, try starting your HHR.

If your HHR starts without any issues, let it run for a few more minutes to allow the alternator to provide power to the battery. If your HHR doesn't start right away, wait for a few more minutes, and give it another attempt. If it still doesn't start after a couple more tries, you may need to check if the battery connection is proper or consider other issues.

AD

Disconnecting the Jumper Cables

Once your Chevy HHR is running, turn off both vehicles. Remove the jumper cables in the reverse order they were connected: first, remove the black clamp from the grounding point on your HHR, then from the functioning vehicle's battery. Next, remove the red clamp from your HHR's positive terminal, followed by the functioning vehicle's positive terminal.

Allow your Chevy HHR to run for a while to recharge the battery fully. After driving around for 15-30 minutes, you can shut off your HHR, and it should restart without any issues.

And there you have it! Now you know how to jump start your Chevy HHR and get back on the road in no time. Always remember safety first, and have jumper cables in your vehicle for when you might need them. Happy driving!

AD
AD