how to jump a chevy hhr

How to Jump a Chevy HHR: Expert Guide

By Anthony Lee
AD

Looking to give your Chevrolet HHR some extra oomph? Jumping a car might be a necessary skill to have, especially when driving an older or classic vehicle. Here's a step-by-step guide on how to jump a Chevy HHR, ensuring you're back on the road in no time.

Before we dive in, remember that jumping a car should be a last resort. Always prioritize safe and proper maintenance to prevent the need for a jump. Now, let's get started.

Preparation and Safety

First, ensure you have a reliable set of jumper cables. Heavy-duty cables with insulated clamps and a capacity of at least 10 feet are recommended. Also, gather a pair of gloves, safety glasses, and a cloth to clean the battery terminals.

AD
Chevy HHR Jump Start
Chevy HHR Jump Start
Things To Know About Cars, Basic Car Knowledge, Emergency Driving Tips, Car Driving Tips Diagram, Car Learning Tips, Car Tips, Basic Car Driving Tips, Car Knowledge Tips, Car Basics
Things To Know About Cars, Basic Car Knowledge, Emergency Driving Tips, Car Driving Tips Diagram, Car Learning Tips, Car Tips, Basic Car Driving Tips, Car Knowledge Tips, Car Basics
Chevrolet Hhr 2010 Owner’s Manual - DIY & Guides
Chevrolet Hhr 2010 Owner’s Manual - DIY & Guides

Avoid jump-starting a car with a frozen battery. The freezing point can cause the battery to crack or leak. Moreover, never jump-start a vehicle with a significantly damaged or leaking battery to prevent injury and potential damage to both vehicles.

Jump-Starting the Chevy HHR

Now that you've got the necessary safety gear and equipment, follow these steps to jump-start your Chevy HHR:

Position the Vehicles

Park the two vehicles close together, ensuring their batteries are within reach of the jumper cables. Turn off both vehicles, and remove the keys. Engage the parking brake on both vehicles to ensure they don't roll away.

If using a portable jump starter, secure the unit to the HHR's battery and connect the jumper cables according to the manufacturer's instructions. Proceed directly to the "Connect the Jumper Cables" step below.

AD

Prepare the Jumper Cables

Inspect the jumper cables for any damage or fraying. If necessary, replace the cables before proceeding to prevent injury and potential damage to your vehicles.

Ensure both vehicles' batteries are insulated. If not, clean the battery terminals and cover them with a cloth to minimize the risk of short circuits.

Connect the Jumper Cables

First, connect the red clamp of the jumper cable to the positive (+) terminal of the donor vehicle's battery. The positive terminal is usually larger and has a plus sign or "POS" marked on it.

AD

Next, connect the other red clamp to the positive (+) terminal of your Chevy HHR's battery. Now, take the black clamp and attach it to the negative (-) terminal of the donor vehicle's battery. The negative terminal is typically smaller and has a minus sign or "NEG" marked on it.

Start the Donor Vehicle

Start the engine of the donor vehicle and let it run for a few minutes. This allows the alternator to charge your Chevy HHR's battery.

While the engine is running, occasionally turn on your HHR's headlights or other electrical components to drain any remaining power from the battery. This helps the charging process and prevents excessive strain on the battery once started.

AD

Start Your Chevy HHR

After a few minutes, attempt to start your Chevy HHR. If the engine turns over but doesn't start immediately, give it a few more tries at 10-second intervals. If it fails to start after a few attempts, check your connections and ensure all clamps are securely attached to the correct terminals.

Once your HHR starts, let the engine run for a few minutes to allow the alternator to begin recharging the battery.

Disconnecting the Jumper Cables and Final Steps

While the engines are running, disconnect the jumper cables in the reverse order of how they were connected:

  • Remove the black clamp connected to the donor vehicle's negative (-) terminal.
  • Disconnect the red clamp from your Chevy HHR's positive (+) terminal.
  • Remove the red clamp connected to the donor vehicle's positive (+) terminal.

The final step is to allow your Chevy HHR to run for an additional 15-20 minutes to ensure its battery has sufficiently recharged. If possible, drive the vehicle around town to further charge the battery. This will help prevent similar issues in the future.

Now that you've successfully jump-started your Chevy HHR, you can head back out on the road with confidence, knowing you have the skills to get yourself out of a jam when needed. Regular maintenance can help prevent battery issues, so be sure to keep up with routine inspections and servicing on your vehicle. Safe driving!

AD