how to start a stihl ms250

Mastering Your MS250: Step-by-Step Guide on How to Start a Stihl MS250

By James Clark
AD

Starting a STIHL MS250 chainsaw, a top choice for homeowners and professionals alike, is a straightforward process that ensures safety and longevity for your tool. Whether you're a seasoned user or a novice, this guide will walk you through the step-by-step procedure to start your MS250 chain saw safely and efficiently.

Before we begin, ensure your MS250 is on a stable, flat surface, and always follow STIHL's operating instructions and safety guidelines to prevent damage and accidents. Now, let's dive into the details of starting your STIHL MS250 chain saw.

Preparation for Starting the MS250

Preparation is key to a smooth start. Before you begin, check your MS250 for any visible damage, and make sure the chain is properly tensioned and sharp. The air filter and spark plug should also be in good condition. If any of these components need replacement or adjustment, address them before proceeding.

AD
an orange and black chainsaw sitting on the ground
an orange and black chainsaw sitting on the ground
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.

Next, gather your starting equipment: gloves, safety glasses, ear protection, and chaps or sturdy clothing to protect your legs. It's also essential to have a partner with you to provide assistance if needed. Once you've assembled your gear and completed the pre-start checklist, you're ready to begin.

Setting the Chain Brake

The chain brake is an essential safety feature on the MS250. It enables you to stop the chain instantly, preventing kickbacks and reducing the risk of accidents. Before starting the chain saw, engage the chain brake by pulling the hand guard toward you until it locks in place. This action ensures that even if the saw's engine backfires, the chain will not continue to rotate, enhancing your safety while operating the tool.

a man in black jacket chopping wood with chainsaw
a man in black jacket chopping wood with chainsaw
a man holding a chainsaw in his hands
a man holding a chainsaw in his hands

Remember, it's crucial to keep the chain brake engaged until you're ready to start the saw. Once you've pulled the start cord a few times to prime the engine, you can release the chain brake gently. Be sure to re-engage it after each cut for optimal safety.

Fueling the MS250

Before filling the fuel tank, consult your MS250's user manual to determine the recommended fuel mixture for your specific model. Typically, STIHL chain saws require a 50:1 ratio of gasoline to 2-cycle engine oil. Never use unleaded gasoline with more than 10% ethanol or non-stabilized fuel, as these can damage your saw's engine.

AD

Once you've prepared your fuel mixture, fill the MS250's fuel tank using the provided fuel filler cap, ensuring that you don't overfill it. After filling, allow the saw to sit for a few minutes to enable the fuel to settle and prime the carburetor properly. Then, you're ready to proceed with starting your MS250.

Starting the STIHL MS250 Chainsaw

Starting a STIHL MS250 chain saw involves several simple steps, primarily focusing on warming up the engine, priming the carburetor, and pulling the start cord. Follow these steps carefully to ensure a successful start every time.

Warming up the engine is essential for the smooth operation and longevity of your MS250. Begin by engaging the throttle trigger gently, pulling it about halfway. Hold it in this position for approximately 10-15 seconds, allowing the engine to warm up slightly before attempting to start it. This step helps lubricate the engine and other moving parts, reducing the wear and tear on your tool.

AD

Priming the Carburetor

Before pulling the start cord, it's crucial to prime the carburetor to ensure a successful start. The MS250's carburetor primer is located on the left side of the saw, above the fuel tank. Press the primer bulb gently five to seven times, allowing enough fuel to be drawn into the carburetor for starting.

Be careful not to press the primer bulb too many times, as excessive fuel in the carburetor can cause flooding, making it difficult to start the saw. After priming, release the throttle trigger and allow the engine to sit for a few seconds to enable the fuel to settle.

Pulling the Start Cord

With the throttle trigger released and the engine primed, it's time to pull the start cord. Ensure that your dominant hand is on the rear handle, and your other hand is on the front handle, maintaining a firm grip on the saw. Keep your feet shoulder-width apart for better balance and stability.

AD

Pull the start cord quickly and firmly in one continuous motion, ensuring that you don't jerk or snap the cord. Do this several times, allowing the engine to warm up gradually. Once the engine starts, release the start cord immediately to prevent excessive wear on the start mechanism.

Post-Start Care and Safety Tips

After successfully starting your STIHL MS250, perform a few final checks to ensure optimal performance and safety during your cutting tasks.

First, allow the engine to run for a minute or two, giving it time to warm up fully. This step enables the Saw Chain Oil (SCO) intake to draw lubricant for the chain and sprocket, reducing friction and wear. During this warm-up period, listen for any unusual noises that may indicate a problem with your saw, and address them promptly.

Checking the Chain Tension and Lubrication

Before operating your MS250, check the chain tension and ensure that it's appropriately adjusted. A properly tensioned chain will provide better cutting efficiency, reduce wear, and enhance your saw's overall performance. To adjust the chain tension, use the chain tensioning screw, located on the side plate of the saw's engine, and follow the manufacturer's guidelines for proper tensioning.

Additionally, ensure that the chain is receiving adequate lubrication by inspecting the chain oil level in the chain oil tank. The tank is visible through the sight window on the right side of the saw. If necessary, add the appropriate amount of SCO to maintain proper lubrication for the chain and sprocket.

Safety Features and Proper Handling

Before beginning your cutting tasks, familiarize yourself with your MS250's safety features, such as the chain brake, hand guard, and kickback guard. Ensure that you understand how to operate these features correctly and that they're properly functioning.

Avoid excessive maneuvering of the saw, as this can lead to kickbacks and other potentially hazardous situations. Instead, use safe and controlled cutting techniques, allowing the saw's natural cutting action to do the work for you. Additionally, always keep your hands on the rear and front handles, maintaining full control of the saw at all times.

Finally, remember that routine maintenance is key to the longevity and performance of your STIHL MS250. Regularly clean the air filter, inspect the spark plug, and keep the chain sharp and tensioned properly. By following these tips, you'll ensure that your MS250 remains in peak condition, ready to tackle your cutting tasks effortlessly.

Starting your STIHL MS250 chain saw is a straightforward process that, when done correctly, ensures a reliable and safe tool for your projects. By following this guide, you're well on your way to mastering the art of operating your MS250 with confidence and precision. So, grab your protective gear, gather your equipment, and let's get started on your next cutting task. Happy sawing!

AD