How to Make Cordless Faux Wood Blinds Instantly Shorter
Investing in cordless faux wood blinds for your home or office brings a touch of elegance and functionality to your space. However, what if the blind you've purchased is a tad too long for the window? Fret not! This guide will walk you through the simple, step-by-step process of how to shorten cordless faux wood blinds to fit your window perfectly.
Before diving in, ensure you have the following tools on hand: a retractable tape measure, a marking pen, a miter box or hacksaw, sandpaper, and safety glasses. Remember, working with caution is crucial, especially when cutting and sanding.
Understanding Cordless Faux Wood Blinds
Cordless faux wood blinds, also known as top-down/bottom-up blinds, consist of wooden slats coated with a durable, easy-to-clean PVC material. They operate on a system of tilted cords at the top and bottom, allowing you to raise, lower, or tilt the blinds. Understanding how these mechanisms work is key to safely shortening your blinds.
As they're cordless, there's no need to worry about cord length adjustments. Instead, focus on the headrail (the top part) and the bottom rail (the lowest part that supports the blind).
Measuring for the Right Length
The first step in shortening your cordless faux wood blinds is to measure the window's height accurately. Using your retractable tape measure, measure from the top of the window frame to where you want the bottom rail to rest when the blinds are fully lowered.
Subtract 1.5 inches from this measurement to account for the headrail and bottom rail. This is the length you'll need to cut the blind to, ensuring it fits perfectly in your window.
Marking and Cutting
Once you've determined the required length, mark the measurement on the headrail and bottom rail using your marking pen. Be careful not to mark beyond the limits of the blind's tilted cords to avoid damaging the mechanism.
secure the headrail and bottom rail in your miter box or hold them firmly with clamps. Using a hacksaw or miter box saw, carefully cut along your marked line. Ensure the cut is clean and smooth to maintain the blinds' appearance and functionality.
Preparing the Cut Ends
After cutting, your blinds may have rough or sharp edges. It's crucial to sand down these cuts to prevent damage to the blinds or injuries to your hands while operating them.
Using fine-grit sandpaper, gently sand the cut ends of both the headrail and bottom rail until smooth and even. Be sure to wear safety glasses during this process to protect your eyes from debris.
Reassembling and Testing
With the cuts made and sanded, reassemble your blinds by reattaching the headrail and bottom rail to the blind's chords. Ensure the tilted cords are secure and the blind still operates smoothly.
Test your shortened blinds by raising and lowering them several times. Make sure they function correctly, and the cordless mechanism isn't obstructed in any way.
Installing Your Shortened Blinds
Now that your blinds are the perfect length, it's time to install them in your window. If you haven't already, measure and mark the width of your window. Attach the brackets to the wall or window frame at these marks, ensuring they're level.
Rest the shortened blinds onto the brackets, with the headrail fitting securely into the brackets' groove. Test the operation once more to ensure everything is working as expected.
There you have it! You've successfully shortened your cordless faux wood blinds to fit your window like a glove. Enjoy the satisfaction of a job well done, knowing you've saved time and money by tackling this project yourself. Happy blinds-ful updating!