Shorten Allen Roth Cordless Blinds: Expert Tips
While cordless blinds offer the convenience of mechanized control without tangling cords, they can sometimes be too long for your windows. In such cases, you might wonder, "How can I shorten Allen Roth cordless blinds?" The good news is, it's possible, and it's actually quite straightforward.
Remember, safety is a priority when dealing with electric components. Always ensure the power is off and the battery is removed before beginning any modification process. Now, let's dive into the process of shortening your Allen Roth cordless blinds.
Understanding the Allen Roth Cordless Blind Mechanism
Before we dive into the process, it's crucial to understand how Allen Roth cordless blinds operate. They use a battery-powered motor to drive a small gear that turns a lift cord, raising or lowering the blinds. The lift cord is connected to the headrail, where it meets the slats, allowing for smooth operation.
The length of the whole unit is determined by the length of the slats and the lift cord. To shorten the blinds, we'll be adjusting the lift cord.
Materials Needed for Shortening Allen Roth Cordless Blinds
You'll need a few basic tools and materials for this process. These include:
- A tape measure
- A Phillips screwdriver
- Optional: A drill and drill bit, if you need to create new holes
Steps to Shorten Allen Roth Cordless Blinds
Now that you have your materials ready, follow these steps to safely and effectively shorten your Allen Roth cordless blinds:
- Remove the blinds from the window. disconnect the power and battery pack, and carefully lay them flat.
- Measure the length you want to shorten. Remember to account for the headrail and the bottom bar.
- Retract the blind to its fully closed position. You'll see the lift cord and the tension it creates as it lifts the blinds.
- Carefully cut the lift cord to the desired length. Be sure to leave enough cord to accommodate the full operation of the blind.
- With the cord cut, the excess slats will now sag. Remove these slats, carefully separating them from the chain and the lift cord.
- Once you've removed the excess slats, you can rehang the blinds. Ensure they operate smoothly and neatly.
If the ladder tapes (the strings that run through the slats) need rethreading through the new assembly, you can carefully do so using a small tool or even a straightened paper clip. Be gentle to avoid damaging the tapes.
Tips and Warnings
Always ensure you're working in a well-lit, safe area when dealing with power tools. If you're unsure about any part of the process, don't hesitate to consult a professional or reach out to Allen Roth's customer support.
And remember, cordless blinds should ideally be installed by a professional to ensure safety and proper functioning. The process above is more of a last-resort solution when the blinds are already installed and you need to shorten them.
In the end, while shortening Allen Roth cordless blinds might seem daunting at first, it's a manageable task with the right tools and knowledge. So, Measure, cut, adjust, and enjoy your perfectly fitting blinds!