how to setup onkyo receiver to speakers

"Step-by-Step: Setting Up Your Onkyo Receiver with Speakers"

By Hannah Anderson
AD

Setting up an Onkyo receiver to your speakers might seem daunting at first, but with the right steps, you'll have your home theater system up and running in no time. This guide will walk you through the process, ensuring you get the best sound quality from your Onkyo receiver.

Before you begin, gather all the necessary components: your Onkyo receiver, speakers, speaker wires, and any other accessories that came with your system. Make sure you have enough space around your receiver for proper ventilation and easy access to all ports.

Understanding Your Onkyo Receiver

The first step is to understand the layout and functionality of your Onkyo receiver. Familiarize yourself with the front panel controls, input sources, and speaker outputs. Your receiver's user manual will be an invaluable resource during this process.

AD
Best Listening Mode for Onkyo Receivers: What to Set - BoomSpeaker
Best Listening Mode for Onkyo Receivers: What to Set - BoomSpeaker
Onkyo AV Receivers: Comparing the RZ Series
Onkyo AV Receivers: Comparing the RZ Series
the home theater speaker guide is shown
the home theater speaker guide is shown

The Onkyo receiver's labeling system can vary by model, but typically, you'll find the following key components:

  • Power Indicator: A light that turns on when the receiver is powered on.
  • Input Buttons/Selector: Used to choose the source device (e.g., TV, CD, Bluetooth).
  • Volume Control: Adjusts the overall system volume.
  • Display: Shows the selected input source, volume level, and other relevant information.
  • Speaker Outputs: These are usually labeled as Main (or A), Surround (or B), and Center (or C).

Speaker Binding Posts

On the back of your receiver, you'll find the speaker binding posts – these are where you'll connect your speaker wires. Onkyo receivers typically use spring-loaded binding posts that can accommodate bare wire ends, spade lugs, or banana plugs.

Onkyo AV Receivers: the NR & SR Series Compared
Onkyo AV Receivers: the NR & SR Series Compared
two stereos are sitting side by side on top of each other in front of a white background
two stereos are sitting side by side on top of each other in front of a white background

Each channel (Main, Surround, Center, etc.) has a positive (+) and negative (-) terminal. Connect your speaker wires according to the receiver's polarity – incorrect polarity can result in phase issues leading to a suboptimal sound performance. If you're unsure, consult your speaker manual or look for a polarity diagram near the binding posts.

Speaker Wire Connectivity

Speaker wires usually have one insulated and one bare strand, which correspond to the positive and negative terminals on the binding posts. Strip about 1/2 inch of insulation from each wire end using wire strippers or scissors (be careful not to damage the exposed strands). Then, insert the stripped ends into the binding posts, ensuring that each wire is securely connected to its respective terminal.

AD

For banana plugs or spade lugs, simply insert them into the binding posts. Again, make sure they're fully seated and tightly secured. Tighten any setscrews if necessary. Once all your speakers are connected, double-check all wiring to ensure accurate polarity and secure connections.

Configuring Your Speaker Settings

With your speakers physically connected to the receiver, it's time to configure your speaker settings in the receiver's menu. This ensures the receiver recognizes your speaker layout and optimizes sound output accordingly.

The process can vary by Onkyo receiver model, but here's a general outline:

AD
  1. Press the "Setup" or "Menu" button on the remote to access the receiver's settings.
  2. Navigate to the "Speaker Settings" or "Setup" menu option.
  3. Select "Speaker Configuration" and choose the type of speakers connected to each channel (e.g., Front, Center, Surround, etc.).
  4. If your speakers are not amplified (powered), set them to "Small speakers" or "B" for each channel.
  5. If your speakers are bi-amped or bi-wired, configure your settings accordingly.
  6. Once you've configured your speaker settings, tap "OK" or "Exit" to save your changes and close the menu.

Calibrating Speaker Levels

To ensure balanced and optimized sound throughout all channels, it's essential to calibrate your speaker levels. This can be done using the receiver's built-in setup microphone or an external microphone connected via a 3.5mm jack.

Here's a simple process for calibrating speaker levels:

  1. Access the receiver's calibration settings in the menu.
  2. Follow the on-screen instructions to place the microphone at the main listening position.
  3. One by one, the receiver will output test tones through each channel. Adjust the corresponding speaker level using the remote's "+" and "-" volume buttons until the tone reaches a nominal level (usually indicated by the receiver).
  4. Complete this process for each channel (Front Left, Front Right, Center, Surround Left, Surround Right, and Subwoofer if applicable).

Running an Automatic Speaker Setup

Some Onkyo receivers offer an automatic speaker setup feature, such as AccuEQ or Audyssey MultEQ. These systems use room correction techniques to analyze your acoustic environment and automatically calibration speaker levels, delays, and equalization.

AD

To use this feature:

  1. Access your receiver's menu and select the appropriate automatic speaker setup option (e.g., AccuEQ or Audyssey MultEQ).
  2. Follow the on-screen instructions, placing the included microphone at the main listening position.
  3. The receiver will analyze your room's acoustics and automatically calibrate speaker settings based on its findings.
  4. Once complete, enjoy your perfectly optimized, room-adapted sound!

Now that you've successfully set up your Onkyo receiver to your speakers and optimized your system's performance, it's time to sit back, relax, and appreciate the superior sound quality your receiver delivers. Don't forget to explore your receiver's other features, such as network connectivity, multi-room audio, and entertainment options, to get the most out of your investment.

AD