how to setup skateboard

Mastering the Basics: Step-by-Step Guide to Setting Up Your Skateboard

By Emily Lewis
AD

Setting up a skateboard might seem daunting, but it's actually a straightforward process. With the right tools and a little patience, you can have your new skateboard ready to roll in no time. In this guide, we'll walk you through the steps to set up your skateboard, from gathering your materials to understanding each component.

Before we dive in, it's important to note that there are various types of skateboards, each designed for different skateboarding styles. Today, we'll focus on the standard 'complete' skateboard, which is great for beginners and ideal for street and park skating.

The Tools and Materials You'll Need

To set up your skateboard, you'll need a few basic tools and materials:

AD
Skateboard Beginners
Skateboard Beginners
a man standing on top of a skateboard with the caption'do a tutor on that board grab in the beginning '
a man standing on top of a skateboard with the caption'do a tutor on that board grab in the beginning '
How to BS POWERSLIDE
How to BS POWERSLIDE

  • Your skateboard
  • A skate tool (includes an Allen wrench, Phillips screwdriver, and wheel wrench)
  • Grip tape
  • Rubber bushings (if not included with your deck)
  • -hardware set (if not included with your trucks)

How to: skateboard in five minutes
How to: skateboard in five minutes
New Board Setup Process
New Board Setup Process

Gathering Your Skateboard Components

Let's first understand your skateboard's components. A complete skateboard consists of a deck, trucks, wheels, and grip tape.

decks come in different sizes, shapes, and concave levels. They're made of maple or bamboo and covered in grip tape to provide traction. Trucks are the metal T-shaped pieces that connect the wheels to the board. They determine the skateboard's stability and turning ability. Wheels come in various sizes, hardness (durometer), and styles, each designed for different skating preferences. Finally, grip tape is the sandpaper-like material that sticks to your deck's surface to give you a solid grip.

AD

Setting Up Your Skateboard

Once you've gathered your materials and have an understanding of your skateboard's components, let's dive into the setup process.

Start by preparing your workspace. A well-lit, flat surface is ideal for assembly. Then, lay out all your components to get a clear picture of what you'll be working with.

Installing the Grip Tape

First, let's install the grip tape on your deck. Grip tape comes in sheets, so you'll need to measure and cut it to fit your deck. Start by peeling off the backing paper, then line up the tape with the edge of your deck. Use a marker to trace the outline, then cut the tape to size.

AD

Once cut, peel off the second layer of backing paper, and slowly stick the grip tape to your deck, starting from one end and pressing down as you go. You want to avoid creating air bubbles, so work carefully. Once the tape is stuck down, used a razor blade or box cutter to trim the excess tape from the edges of your deck.

Attaching the Trucks

Next, let's attach the trucks to your deck. To do this, you'll need to first remove the rubber bushings from the truck's kingpin. These bushings sit between the hanger and the baseplate and provide cushioning. Once removed, place the truck's baseplate flat against your deck's underside, aligning it with the pre-drilled holes. Then, insert the kingpin through the hole and secure it using the provided hardware.

Tighten the kingpin Using your skate tool, turn the nut clockwise to tighten the kingpin. Be careful not to overtighten, as this could damage the truck's bushings and make your board harder to turn. Most skateboarders tighten the kingpin just enough to keep the truck secure but still allow for some movement. You can fine-tune the tightness later to suit your skating style. Repeat this process for the second truck.

AD

Installing the Wheels

With the trucks attached, it's time to install the wheels. Start by putting one wheel on the axle of each truck, with the lug nuts loosely screwed on. Then, stand your board on its side and use your skate tool to tighten the lug nuts. Again, don't overtighten—the wheels should still spin freely.

Once the wheels are secured, use your hand to check that they spin smoothly. If they feel too tight or wobbly, adjustments can be made by tightening or loosening the nut slightly. Now, give your deck a gentle tug to ensure the trucks are secure. Your skateboard is now ready to roll!

Skateboarding is a lifelong learning process, and mastering your board's setup is just the beginning. As you progress, you'll likely tweak your board's components to better suit your style and the various terrain you ride. Enjoy the journey, and remember, safety first—always wear a helmet and protective gear when skating.

AD