Burton Mission Bindings Setup: Ultimate Guide
When it comes to hitting the slopes, having the right equipment is paramount. Among the essential pieces, bindings are one of the most crucial, as they link your boots to your board and ensure your safety and control on the mountain. Burton's Mission bindings are a popular choice among snowboarders, offering a balance of lightweight construction, responsiveness, and durable performance. So, let's dive into how to set up your Burton Mission bindings the right way.
Before we begin, it's essential to understand that proper fit and adjustment are key to ensuring optimal performance and safety. The Burton Mission bindings come in two sizes, Medium (M) and Large (L), so you'll need to choose the right size based on your boot size and riding style.
The Right Binding for Your Board
The first step in setting up your Burton Mission bindings is to ensure they're compatible with your snowboard. These bindings are designed to work best with Burton's Channel board mounts, which provide a more precise and adjustable fit. If you're unsure about your board's compatibility, you can always double-check with Burton's snowboard bindings compatibility chart.
Once you've confirmed compatibility, it's time to start the installation process.
Tool Required: 3mm Hex Key
Now, let's discuss how to attach your bindings to your snowboard.
Attaching the Bindings
-
First, lay out your snowboard and bindings on a flat surface. Make sure the board's insert holes align with the binding's mounting pattern.
-
If your board uses the Channel mounting system, insert the Channel bolts through the binding's feet and into the Channel slots. For boards that don't use the Channel system, align the binding's feet with the board's insert holes.
-
Using your 3mm hex key, hand-tighten the bolts until they're snug. Be careful not to overtighten, as this can strip the threads or damage the bolts.
-
Once the bolts are snug, use a binding wrench or an adjustable wrench to fully tighten them. The manufacturer recommends a torque of 10 in/lbs for Channel boards and 13 in/lbs for other boards. If you don't have a torque wrench, no worries - simply tighten the bolts as much as you can while still being able to turn them by hand.
With your bindings now securely attached to your board, it's time to fine-tune the fit and adjust the bindings for your unique riding style.
Adjusting the Bindings for Your Boots
The Burton Mission bindings feature a שנתS0 Widened Footbed, which offers a solid foundation for your boots. But to ensure optimal comfort and performance, you'll want to adjust the bindings to perfectly match your boot size and stance.
Before you start making any adjustments, make sure to read through the manufacturer's instructions that came with your bindings. Burton provides detailed guidance on adjusting their bindings, and it's always a good idea to follow their recommendations.
Adjusting the Strap Position
The Mission bindings come with Burton's buckled closure system, which allows you to adjust the strap position to accommodate different boot sizes and styles. To do this, simpley loosen the screw on the strap's mounting bracket, slide the strap to the desired position, and then tighten the screw to secure it in place.
It's best to start with the strap in the middle position, and then adjust it based on your boot size and comfort. Smaller boots will typically benefit from a forward strap position, while larger boots may require the strap to be moved back.
Adjusting the Highback Angle
The highback is another adjustable component of the Mission bindings, allowing you to tweak the response and support offered by the bindings. A higher highback angle provides more leverage for turning and more aggressive carving, while a lower angle offers more freedom of movement for park and jib riding.
To adjust the highback angle, loosen the highback mounting screws using your 3mm hex key. Rotate the highback to your desired angle, and then tighten the screws to secure it in place. Experiment with different highback angles to find the one that works best for your riding style.
With your bindings now properly attached to your board and adjusted to match your boots and riding style, you're nearly ready to hit the slopes. The final step is to ensure your bindings are correctly located on your board for optimal performance.
Setting Your Stance Width and Angles
Stance width and angles play a significant role in your snowboarding experience, affecting everything from turn initiation to stability and control. The Burton Mission bindings allow you to set your stance width between 18.5'' and 23'' and your angles between -15° and +15°.
To adjust your stance, you'll need to loosen the mounting screws on the binding's feet and slide them to the desired position. Once you've found the perfect stance, tighten the mounting screws to secure the bindings in place.
It's essential to note that there's no one-size-fits-all stance setting. Experiment with different widths and angles to find the combination that feels most comfortable and performs best for you. Don't be afraid to make gradual adjustments to your stance over time as your skills and riding style evolve.
Now that you've properly set up your Burton Mission bindings, it's time to hit the slopes! Remember, always double-check your bindings and hardware before each ride to ensure they're still secure and in good working condition. And as always, if you have any questions or concerns, don't hesitate to reach out to Burton's customer service for assistance.
Happy shredding! With your Burton Mission bindings properly set up, you're ready to make the most of every snow-covered adventure that comes your way. So, grab your board and hit the mountain - your winter wonderland awaits!