How to Rewind Ryobi Trimmer Line
Ever found yourself in the middle of trimming your lawn, only to realize your Ryobi trimmer line has run out? Don't let this minor setback disrupt your entire yard work plan. Rewinding the trimmer line is a quick and easy process that can save you time and money. Let's dive into the step-by-step guide: how to rewind Ryobi trimmer line.
Before you start, ensure your trimmer is unplugged from any power source if it's electric, or simply turn off the engine if it's gas-powered. Safety first! Now, grab your fresh spool of trimmer line and let's get started.
Understanding Your Trimmer Head
The first step in rewinding your Ryobi trimmer line is understanding the different parts of your trimmer head. The trimmer head houses the spool of line and allows you to feed out more line as needed. It's usually circular and screws onto the trimmer shaft.
Locate the release button on the side of your trimmer head. This button, when pressed, allows the line to feed out. You'll also see a small hole on the side of the head near the button. This is where you'll insert your new trimmer line.
Preparing the Line
First, you need to measure the line you'll be using. Ryobi recommends using lines that are around 9 feet long for easier feeding. Cut your line to the appropriate length, leaving some extra length for adjustments.
Next, find the eyelet or hole at one end of your line. This will help you anchor the line and guide it through the trimmer head. If your line doesn't have an eyelet, you can easily create one by punching a small hole at one end.
Loading the Line
Now that your line is prepared, it's time to load it onto your trimmer head. Start by inserting the end of your line into the small hole on the side of your trimmer head. You may need to simultaneously press the release button to make this easier.
Once the end of your line is inside the trimmer head, guide it downwards towards the spool. Be careful not to allow the line to bunch up as it can cause jams later. Typically, you'll feed the line in a clockwise direction around the spool.
Rewinding the Line
Now that your line is inserted into the trimmer head, it's time to start rewinding it onto the spool.
Hold the line taut with one hand, and use the other to turn the trimmer head counterclockwise. The line should start to wrap around the spool. Continue turning the head until you've used up most of the 9 feet of line you prepared earlier.
Leaving Enough Line
After you've wound most of the line onto the spool, make sure to leave some extra line outside the trimmer head. Ryobi recommends leaving about one foot of line sticking out from each side of the head.
Once you've left enough line outside, continue to turn the trimmer head counterclockwise until the line is taut. This ensures the line is ready for use and prevents it from unraveling when you start trimming.
Securing the Line
Finally, it's time to secure your line. With the extra line still taut, press and hold the release button on the side of the trimmer head. This will stop the line from feeding out and lock it in place.
Release the button gently and you've successfully secured your line. Rewind the extra line back onto the spool, ensuring it's not bunched up or twisted. If it is, simply untwist and rewind it carefully.
And there you have it! You've just learned how to rewind your Ryobi trimmer line. With this new skill, you can keep your trimmer in perfect working order, ready to tackle any yard work that comes your way. Happy trimming!