how to reset replace drum on brother printer

How toReset Replace Drum onBrother Printer

By Hannah Thomas
AD

When your Brother printer's drum wears out, it can affect print quality, often leaving blank pages or faint prints. Replacing it is a straightforward task that can help restore your printer's performance. Here's a detailed, step-by-step guide on how to reset and replace the drum on your Brother printer.

Before you start, make sure you have your Brother printer model number at hand. This guide ensures you're using the right drum for your specific printer model. It's also helpful to have the new drum, aphantom paper, and a flat-head screwdriver ready.

Understanding Your Brother Printer's Drum

The drum in your Brother printer is part of the printer cartridge along with the toner. It's a cylindrical photoreceptive unit that rotates under a laser beam to receive an image. This image is then developed and transferred onto paper by the toner.

AD
How To Reset Drum On Brother Printer
How To Reset Drum On Brother Printer
How to Fix ''REPLACE DRUM'' Error Message on Brother Printer
How to Fix ''REPLACE DRUM'' Error Message on Brother Printer
Brother HL Printer Not Working (How To Fix/Reset) - Ready To DIY
Brother HL Printer Not Working (How To Fix/Reset) - Ready To DIY

Depending on your Brother printer model, the drum might be integrated with the toner cartridge (called an all-in-one cartridge) or sold separately (called a separate drum). This guide will cover both types.

Identifying the Drum in Your Brother Printer

First, you need to locate the drum in your printer. For all-in-one cartridges, the drum is inside the cartridge. For separate drums, it's a cylindrical component inside the printer's body.

How to Reset Drum on Brother Printer HL-L2370DW
How to Reset Drum on Brother Printer HL-L2370DW
How to reset Drum on Brother HL 2270DW Printer HL 2220 HL 2230 HL 2240 HL 2250
How to reset Drum on Brother HL 2270DW Printer HL 2220 HL 2230 HL 2240 HL 2250

To find it, open your printer and look for a cylindrical part that rotates. It might be hidden inside a compartment or attached to the toner cartridge.

Understanding the Reset Process

After replacing the drum, you'll need to reset your Brother printer. This is because the printer remembers the life of the old drum and needs to know when you've installed a new one. Resetting the printer ensures it recognizes the new drum and evitates low-toner warnings.

AD

Resetting the drum is simple and varies slightly between Brother printer models. Typically, it involves accessing the printer's control panel, navigating to the maintenance settings, and selecting 'Drum Reset'. We'll detail this process later.

Replacing the Drum in Your Brother Printer

Now that you understand the drum and the reset process, let's dive into how to replace it.

Remember, while these steps are general, the process can vary slightly depending on your Brother printer model. Always consult your printer's user manual if you're unsure.

AD

Replacing an All-in-One Cartridge

1. Open the front cover of your Brother printer and lift out the used cartridge.

2. Pull back the yellow release lever on the inside of the cartridge to unlock it. Then, remove the cartridge from the printer.

3. Open the packaging of your new cartridge and pull out the orange tape to remove any protective measures. This step is crucial to avoid damaging the new drum.

AD

4. Align the new cartridge's gold contacts with the printer's corresponding slots and push it firmly into place until you hear a click.

5. Lower the front cover of your printer and close it gently to lock the new cartridge into place.

Replacing a Separate Drum

1. Open the front cover of your Brother printer, then the rear door, to access the printer's inner workings.

2. Look for the drum (a cylindrical black component) and gently lift it out. It might be attached to the toner hopper, so be careful not to disturb it.

3. Remove the old drum from the toner hopper and replace it with the new one, ensuring it's properly seated.

4. Reassemble the printer, ensuring all parts are correctly aligned and locked into place.

Resetting Your Brother Printer

After replacing the drum, you need to reset your printer to register the new component. Here's a general process, but remember, it might vary slightly depending on your printer model.

If you're unsure, consult your printer's user manual for specific instructions.

Accessing the Control Panel

1. Turn on your Brother printer and let it warm up for a few minutes.

2. Located on the printer's front panel, find the 'OK' or 'Start' button.

Navigating to the Reset Option

1. Press and hold the 'OK' button for about five seconds. This should display the settings menu on the printer's LCD screen.

2. Use the '+' and '-' buttons to navigate to the 'Maintenance' or 'Service' option and press 'OK'.

3. Again, use the navigation buttons to select 'Drum Reset' or 'Waste Toner Cartridge Replacement' (the option varies between printer models) and press 'OK'.

4. Follow the on-screen instructions to complete the reset process. Usually, this involves waiting a few seconds or pressing 'OK' to confirm.

Congratulations! You've successfully reset and replaced the drum on your Brother printer. Your printer should now run smoothly with renewed print quality. Regularly maintaining your printer, including replacing the drum as needed, can help extend its lifespan and keep it running optimally.

AD