how to replace a drum in a brother printer

Step-by-Step: Replace a Drum in a Brother Printer

By Nicole Hernandez
AD

Has your Brother printer recently started producing smudged or uneven prints? The drum unit, a crucial component responsible for intricate ink distribution, might be the culprit. Replacing it could breathe new life into your printer. Here's a comprehensive guide on how to replace a drum in a Brother printer, ensuring clarity, efficiency, and print quality.

Before we dive into the procedure, remember that working with printer components requires caution. Always unplug the printer from the power source and remove any connected USB cables. Plus, ensure the printer is placed in a well-lit, secure area to prevent damages.

Identifying the Drum Unit

The drum unit, often referred to as the Photosensitive Drum Unit (PDU) or Drum Unit (DU), is the heart of your printer's printing process. It's a cylindrical component covered in a photoconductive material that attracts toner onto the paper. Identifying it shouldn't be too challenging, as its size and shape are unique.

AD
What is the sign for the printer drum needs to be replaced?
What is the sign for the printer drum needs to be replaced?
How to Replace Toner Cartridge TN360 to Imaging Drum DR360 in Brother Printers
How to Replace Toner Cartridge TN360 to Imaging Drum DR360 in Brother Printers
Brother HL Printer Not Working (How To Fix/Reset) - Ready To DIY
Brother HL Printer Not Working (How To Fix/Reset) - Ready To DIY

In Brother printers, the drum unit is typically located directly behind the ink cartridges. It's usually black or dark grey and has a small handle for easy removal and insertion. The exact location might vary depending on your printer model, so consult your user manual for precise details.

Preparation: Gather Necessary Tools and Components

Before starting the replacement process, gather all the required tools and components:

How To Reset Drum On Brother Printer
How To Reset Drum On Brother Printer
Hear the world’s sounds
Hear the world’s sounds
  • Your new drum unit ( ensure it's compatible with your printer model)
  • Screwdriver (mostly a Phillips-head, but check your user manual)
  • Cotton swabs or soft cloth
  • Isopropyl alcohol
  • Optional: Gloves and safety glasses for protection

Preventing Toner Mess: Clean Up

Before handling the old drum unit, clean the surrounding areas to prevent toner spills. Use a soft cloth or cotton swabs dampened with isopropyl alcohol to gently wipe the interior of the printer, focusing on the area around the drum unit.

Be careful not to apply excessive pressure, as it might dislodge toner particles. Also, avoid touching any internal components with your bare hands to prevent fingerprints or oil marks that could cause issues later.

AD

Step-by-Step Drum Unit Replacement

Now that you're all set, it's time to replace the drum unit. The process varies slightly depending on your Brother printer model, but follow these general steps:

Accessing the Drum Unit

Open the front access cover of your printer, exposing the ink cartridges and other internal components. Locate the drum unit, and if present, remove any protective caps or seals.

Gently grasp the small handle on the side of the drum unit and pull it outwards. In some models, you might need to release a latch or press a button before removing the unit.

AD

Removing the Old Drum Unit

Once the drum unit is partially out, you might notice that it's still attached to a cable or ribbon. This connecting component is usually part of the electrical circuit and must be disconnected before removing the drum unit completely.

Locate the small release lever or button near the cable and press it gently. With the cable disconnected, slowly pull the drum unit out of its slot. Be careful, as the old unit might still be charged with static electricity, which could cause it to leak toner.

Inserting the New Drum Unit

Before installing the new drum unit, inspect it for any damages or defects. Ensure it's clean and dry, as any contaminants could affect print quality.

AD

Align the new drum unit with its slot, making sure the arrows or markers on the unit match the ones inside the printer. Gently push the unit into the slot until you hear it click into place. If your printer model requires reconnecting a cable or ribbon, do so at this point.

Securing the New Drum Unit

Once the new drum unit is securely in place, you might need to push or slide it further to engage any latches or locking mechanisms. Consult your user manual for precise instructions, as this step varies between models.

After securing the drum unit in place, gently pull it in the opposite direction to ensure it's properly locked. Now, you're ready to test your printer's functionality.

Resetting the Printer and Testing Print Quality

Before using your printer, reset it to accommodate the new drum unit:

  • Turn off the printer.
  • Press and hold the 'ON' button for about 5-10 seconds.
  • Release the 'ON' button. The printer should start up and display a message indicating the successful reset.

Performing a Test Print

Now, print a test page to ensure your printer is functioning correctly. Use the control panel to initiate a test print or, if your printer is connected to a computer, use the printer's software to print a test document. Observe the print quality, checking for any signs of smudging or faint print.

If the test print is satisfactory, you've successfully replaced the drum unit in your Brother printer. Continue to monitor print quality over the coming weeks, and don't hesitate to reach out to Brother's customer support if you encounter any issues.

Remember, regular maintenance is key to maintaining your printer's performance. Keep it clean, replace components as needed, and always use compatible Brother ink and toner cartridges to optimize your printer's lifespan. Happy printing!

AD