how to reset galaxy s10

Reset Galaxy S10: Step-by-Step Guide

By Christopher Lewis
AD

Feeling like your Samsung Galaxy S10 is running sluggish or not as smooth as before? A factory data reset might be just what it needs to get back to its sprightly self. But don't worry, it's a simple process, and we'll guide you through it step-by-step. Let's dive in.

Before we proceed, it's crucial to backup your data. This will ensure that all your important files like contacts, photos, and messages are safe. You can use Samsung's Smart Switch or simply connect your S10 to your computer and drag and drop files into a suitable directory.

Preparing Your Galaxy S10 for Reset

As mentioned, the first step is to backup your data. Once that's done, you can start preparing your phone for the reset.

AD
How to reset the Samsung Galaxy S10 phone
How to reset the Samsung Galaxy S10 phone
Samsung Galaxy S10 How To Completely Delete Everything Factory Reset
Samsung Galaxy S10 How To Completely Delete Everything Factory Reset
How to factory reset Galaxy S10 One UI: Two ways
How to factory reset Galaxy S10 One UI: Two ways

Ensure your S10 is charged. A sudden power loss during the reset can brick your device. Ideally, the battery should be around 50% or more.

Enable USB Debugging and OEM Unlock

These settings, hidden in the Developer Options, allow your phone to communicate with your computer more efficiently. Here's how to enable them:

Galaxy S10 / S10+: How to Reset and Erase All Data to Factory Default
Galaxy S10 / S10+: How to Reset and Erase All Data to Factory Default
User manual - Samsung Galaxy S10+
User manual - Samsung Galaxy S10+
  • Go to Settings > About phone and tap Build number seven times to enable Developer Options.
  • Return to Settings > System > Developer Options and enable USB debugging and OEM unlock.

Enter Download Mode

This mode is required to perform a reset using Odin, a Samsung-specific flashing tool. Here's how to enter it:

  1. Turn off your Galaxy S10.
  2. Press and hold the Volume Down and Power buttons simultaneously until the screen turns on.
  3. When you see the screen with a warning message, press the Volume Up button to enter Download Mode.

Resetting Your Galaxy S10 Using Odin

Now that your S10 is in Download Mode, it's time to perform the reset using Odin.

AD

First, download and install Odin on your computer. After that, download the latest official firmware for your Galaxy S10 model. Make sure to choose the right region and carrier.

Connect Your S10 to Your Computer

Once your phone is connected, Odin should recognize it. If a message appears asking you to allow USB debugging, click OK.

In Odin, you'll see your phone's model number in the top-left corner. If it doesn't appear, ensure that your S10 is fully in Download Mode and try again.

AD

Flash the Firmware

Here's how to proceed:

  1. Click on the BL tab in Odin and select the BL file from the downloaded firmware.
  2. Repeat step 1 for the other files (AP, CP, CSC) in their respective tabs. Ignore any tabs that don't have a corresponding file.
  3. Double-check that all files are accounted for and click the Start button.
  4. When the process is complete, your Galaxy S10 will reboot, and you'll see a 'Pass' message in Odin.

Congratulations, you've successfully reset your Galaxy S10! Remember, resetting a device to factory settings means all data (including apps, settings, and files) will be erased. Always backup your data before performing a restore. Safe resetting!

AD