how to reset change oil on jeep wrangler

How to Reset & Change Oil on Jeep Wrangler

By Nicole Taylor
AD

If you're a Jeep Wrangler owner, keeping up with regular maintenance is crucial to extending the life of your vehicle. One of the most important maintenance tasks is changing your oil. But how do you reset the oil change light after you've done the job? Let's dive into a step-by-step guide to help you out.

Before we begin, it's essential to understand that the oil light reset process might differ slightly depending on your Jeep Wrangler's year and trim level. This guide will focus on the most common procedure for 2010 and newer models.

The Preparation: Tools Needed

Before you attempt to reset the oil change light, you'll need a few tools:

AD
Jeep Wrangler Oil Change Reset: A Step-By-Step Guide
Jeep Wrangler Oil Change Reset: A Step-By-Step Guide
How to Reset Oil Light Jeep Wrangler: Step-by-Step Guide - Ran When Parked
How to Reset Oil Light Jeep Wrangler: Step-by-Step Guide - Ran When Parked
How To Reset Change Oil Light on Jeep Wrangler JL
How To Reset Change Oil Light on Jeep Wrangler JL
  • A 10mm socket wrench or a suitable socket.
  • A diagnostic scanner or a code reader (optional but helpful).

Locating the Oil Change Reset Button

The oil change reset button is typically located near the bottom of the steering column, on the left side. It's usually marked with a wrench symbol or a 'service engine soon' label. It might be under a protective cover, so you might need to remove that first using your 10mm socket.

In some models, you might find it on the dashboard, either near the instrument cluster or under the steering wheel. If you're having trouble finding it, consult your owner's manual for your specific model year and trim.

Why Is My Jeep Wrangler Leaking Oil?Explained!
Why Is My Jeep Wrangler Leaking Oil?Explained!
How To Reset Oil Life on Jeep Wrangler JL
How To Reset Oil Life on Jeep Wrangler JL

The Resetting Process

Now that you've located the oil change reset button, it's time to reset the oil light. The process involves turning the ignition on and off repeatedly while pressing the button. Here are the detailed steps:

Using the Reset Button Only

1. Insert your key into the ignition and turn it to the 'ON' position but don't start the engine.

AD

2. Find the oil change reset button. It's usually a small circular button that sticks out slightly. You might need to use a flathead screwdriver to press it.

4. Press and hold the button while turning the ignition to the 'OFF' position.

5. Release the button, then turn the ignition back to the 'ON' position without releasing the button.

AD

6. Repeat this process seven more times, so you've done a total of eight cycles. On the eighth turn to the 'ON' position, the oil light should reset, and the MIL (Malfunction Indicator Lamp) should turn off.

Combining the Reset Button with a Diagnostic Scanner

If you have a diagnostic scanner, you can use it to confirm the reset. After completing the above steps with the oil change reset button:

  1. Connect your scanner to the OBD-II port under your steering wheel.
  2. Turn the ignition to the 'ON' position.
  3. Clear all engine codes using the scanner. This should also reset the oil change light.

After successfully resetting the oil change light, make sure to wait until the oil light comes back on based on your vehicle's recommended oil change interval or 5,000 miles, whichever comes first.

AD

Although this guide provides a general procedure, always refer to your specific Jeep Wrangler's owner's manual for the most accurate information. It's also crucial to remember that this guide only covers the light reset; always ensure you're using the correct oil and filter for your vehicle when performing an oil change.

Driving your Jeep Wrangler off-road and on challenging terrains can put extra strain on it, so regular maintenance is non-negotiable. Keep your Jeep in top shape, and enjoy your adventures with peace of mind!

AD