Step-by-Step: Reset Change Oil Light on Jeep Compass
Is your Jeep Compass' 'Change Oil Soon' light glaring at you? Don't ignore it; it's a critical warning that your engine oil needs replacement. Resetting the oil change indicator is straightforward, and here's a step-by-step guide for Jeep Compass models 2007 to 2021. Remember, the process may vary slightly for other Jeep models or years.
Before you start, ensure you've recently had the oil changed by a professional. The oil life monitor in your Jeep tracks miles driven since the last oil change, not the time elapsed. So, resetting it is only valid if you've indeed changed the oil.
Understanding Your Jeep Compass' Oil Life Monitor
The Oil Life Monitor in your Jeep Compass uses a complex algorithm to track driving conditions and estimate when an oil change is due. It takes into account variables like aggressive driving, short trips, and towing. When the light comes on, it's time to change your oil.
To access the oil life monitor and begin the reset process, follow these steps:
Accessing the Oil Life Monitor
1. **Turn the ignition** to the 'ON' position, but don't start the engine. This allows you to use the infotainment system without starting the car.
2. **Press the 'infotainment' button** on your dashboard. A screen will displayuncia, "Check Tire Pressure Monitoring System."
Resetting the Oil Life Monitor
1. **Press the 'Enter' button** on your turn signal stalk. You'll now see a menu on the screen. Select 'Vehicle Info' using the buttons on the turn signal stalk.
2. **Scroll through the menu options** using the buttons until you find 'Maintenance' or 'Service.' Select it.
Resetting the Oil Life Monitor Light
Follow these steps to reset the 'Change Oil Soon' light after you've changed your oil:
Preparing to Reset
1. **Make sure** the car is still in the 'ON' position and hasn't been started.
2. **Ensure** you're wearing safety glasses to protect your eyes from any oil spills that might occur during the oil change (not within the reset process, but generally while performing maintenance).
Resetting the Oil Life Monitor
1. **Turn the ignition** to the 'OFF' position, then back to the 'ON' position.
2. **Press and hold the 'Messages' button** on the center stack until the display freezes, then release the button.
3. **Using the buttons on the turn signal stalk, scroll through the menu options** until you find 'Oil Life Reset,' then select it.
4. **Press the 'Enter' button** on the turn signal stalk to confirm the oil change. A message will display, "Oil life monitor reset, see you at 40%".
5. **Turn the ignition OFF** and then back to the 'ON' position. The 'Change Oil Soon' light should now be off, and the Oil Life Monitor indicator should display '100%'.
Congratulations, you've successfully reset the oil change light in your Jeep Compass! Remember, your new oil change light timeline has begun. Keep an eye on it, and make sure to change your oil when the light comes back on. Always prioritize regular oil changes for optimal engine performance and longevity. Happy driving!