how to reset 2016 ford escape oil light

Reset 2016 Ford Escape Oil Light: Step-by-Step Guide

By David Garcia
AD

Is the oil light on your 2016 Ford Escape promptly demanding attention, and you're wondering how to reset it? You're not alone. Modern vehicles are equipped with intricate systems that sometimes require manual interventions for minor issues. Resetting the oil light doesn't mean your engine's oil has magically been replenished. Instead, it gives you a chance to remedy the problem safely before severe damage occurs.

Before we delve into the resetting process, understand that the oil light in your 2016 Ford Escape illuminates due to various reasons: low oil level, oil quality, viscosity, or even a faulty oil level sensor. Always address the root cause after resetting the light to prevent recurrent issues.

Understanding the Oil Light System

The oil light system in your Ford Escape is intricate, with the oil level sensor being a crucial component. This sensor, located at the bottom of your oil pan, monitors the oil level and sends signals to the powertrain control module (PCM). If the oil level falls below the acceptable range, the light illuminates, warning you of a potential issue.

AD
HOW TO RESET FORD TPMS LIGHT
HOW TO RESET FORD TPMS LIGHT
Reset an Oil Change Light [Easy Steps for American-Made Vehicles]
Reset an Oil Change Light [Easy Steps for American-Made Vehicles]
How to Reset the Oil Life on a 2013 Ford Explorer
How to Reset the Oil Life on a 2013 Ford Explorer

Resetting the oil light is not a fix but a temporary measure to allow you to drive to a safe location for proper inspection and resolution of the underlying problem.

Before You Start

Gather the necessary equipment: a wrench, engine oil suitable for your 2016 Ford Escape (check your owner's manual for the correct type and amount), and a funnel. Ensure your vehicle is on a level surface and allow the engine to sit for a few minutes to let the oil settle.

2016 Ford Escape Oil Life Reset - OilReset
2016 Ford Escape Oil Life Reset - OilReset
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !
Ford Escape Brake/tail Light Replacement (2013-2017) Before facelift !

Safety first! Never attempt to check the oil level or perform any maintenance task when the engine is hot. You could suffer severe burns or cause damage to your vehicle if oil or fluids spurt out suddenly.

Resetting the Oil Light

Here's how to reset the oil light on your 2016 Ford Escape:

AD
  1. Locate the dipstick under the hood. It's usually bright yellow or orange and has an 'O' handle.
  2. Pull out the dipstick and clean it with a cloth or paper towel. Wipe it dry and reinsert it fully, then pull it out again to check the oil level.
  3. If the oil level is below the "Full" mark, use the funnel to pour in the required amount of oil (refer to your owner's manual). Keep checking the oil level as you add the oil to avoid overfilling.
  4. Allow the oil to settle for a few minutes, then recheck the oil level. If the oil is between the "Full" and "Add" marks, you've added the correct amount.
  5. Replace the dipstick securely. Turn the ignition to the "On" position (but don't start the engine). The oil light should go out. If it doesn't, there might be another issue at hand, such as a faulty sensor or low oil pressure.

Addressing the Underlying Issue

After resetting the oil light, carefully observe your vehicle's performance over the next few days. If the oil light comes back on, it's time to visit a professional mechanic or your local Ford dealership for further diagnosis and resolution.

The most common reasons for a persistently illuminated oil light are low oil levels or quality, oil viscosity problems, or a faulty oil level sensor. In some cases, it could indicate severe issues requiring immediate attention, such as a blown head gasket or a severely worn engine.

Oil Changes are Vital

Regular oil changes are integral to maintaining your 2016 Ford Escape's engine health. Consult your owner's manual for the recommended oil change intervals. Typically, it's every 5,000 to 7,500 miles for conventional oil and 10,000 to 15,000 miles for synthetic oil.

AD

Always use high-quality oil meant for your vehicle. Check your owner's manual for the recommended viscosity, usually 5W-20 or 5W-30 for the 2016 Ford Escape.

In closing, remember that the oil light in your 2016 Ford Escape is a wealth of information, guiding you towards engine maintenance needs. Always heed its warnings, perform timely resets, and address the root cause to ensure your engine's longevity. Safe driving and proper maintenance go hand in hand in preserving your vehicle's performance and worth. Happy motoring!

AD