how to reset oil light ford escape

Reset Oil Light Ford Escape: Step-by-Step Guide

By Melissa White
AD

There's nothing quite as unnerving as that dreaded oil light on your Ford Escape flashing onto the dashboard, warning you of potential engine trouble. But fear not! Here's a comprehensive guide on how to reset the oil light on your Ford Escape, ensuring you're back on the road in no time. Remember, always prioritize safety and consult your vehicle's manual if you're unsure about any process.

Before we dive into the reset process, let's address why the oil light comes on in the first place. It's typically due to low oil levels, overheating, or a malfunctioning oil level sensor. Once the issue is diagnosed and rectified, follow the steps below to reset the oil light on your Ford Escape.

Preparing Your Ford Escape for Reset

The first step to reset the oil light is to ensure your engine is safe to work on. Here's how:

AD
HOW TO RESET FORD TPMS LIGHT
HOW TO RESET FORD TPMS LIGHT
How To Reset The Change Oil Light In A Ford Escape 2013 - 2017 And Focus 2013-2017
How To Reset The Change Oil Light In A Ford Escape 2013 - 2017 And Focus 2013-2017
How to Reset Oil Change Light on Ford Escape: Complete Guide by Model Year
How to Reset Oil Change Light on Ford Escape: Complete Guide by Model Year

1. Ensure your engine is cool: Never attempt to check or add oil when the engine is hot, as oil expands and could burn you. Allow the engine to cool for at least 30 minutes after driving.

2. Park on a level surface: Park your Ford Escape on a flat surface to get an accurate reading of your oil level. You wouldn't want to add or change oil only to find out it was correct to begin with.

Ford Escape oil reset simple and easy
Ford Escape oil reset simple and easy
2015 Ford Escape Oil Light Reset / Service Light Reset
2015 Ford Escape Oil Light Reset / Service Light Reset

Checking and Adding Oil

Before you reset the oil light, you need to ensure your oil level is within the recommended range. Here's how to check and add oil:

1. Locate the dipstick: Pull out the dipstick from the oil fill hole, located at the front of your engine on the driver's side.

AD

2. Wipe and reinsert: Wipe the dipstick clean with a lint-free cloth and reinsert it all the way, then pull it out again. Note the oil level on the markings, which should be within the 'FULL' and 'ADD OIL' marks.

3. Add oil if necessary: If your oil level is below the 'FULL' mark, add the correct type and amount of oil, which you can find in your vehicle's manual or under the hood on the oil fill cap. Always add oil slowly and check the level frequently to avoid overfilling.

Replacing the Oil Level Sensor (if necessary)

If your oil level is within the recommended range but the light persists, the oil level sensor might be malfunctioning. Here's how to replace it:

AD

1. Locate the sensor: The oil level sensor is typically located near the oil pan, at the bottom of your engine.

2. Disconnect the wiring harness: Once you've located the sensor, disconnect the wiring harness attached to it.

3. Remove and replace: Using a wrench, carefully unscrew the oil level sensor from the hole in the engine block. Screw in the new sensor tightly, ensuring the O-ring is intact and the sensor is securely fastened. Reconnect the wiring harness.

AD

Resetting the Oil Light on Your Ford Escape

Once you've addressed the underlying issue causing the oil light to come on, follow these steps to reset the light:

1. Start the engine: With your hands off the steering wheel, start your Ford Escape's engine and let it run for about 10 seconds. This allows the oil light system to reset due to the oil pressure increasing.

2. Turn off the engine: Allow the engine to idle for another 10 seconds, then turn off the ignition.

3. Check the oil light: After about 45 seconds, restart your Ford Escape. The oil light should now be off, indicating that the reset was successful.

Driving Precautions After Resetting the Oil Light

After resetting the oil light, ensure you take the following precautions:

1. Keep an eye on your oil level: Monitor your oil level frequently to ensure it remains within the recommended range. If the oil light comes back on or your oil level drops rapidly, there may be a leak or other underlying issue.

2. address any concerns promptly: If the oil light comes back on or you notice any other warning lights or signs of trouble, don't ignore them. Address these concerns promptly to prevent more costly repairs down the line.

There you have it! By following this comprehensive guide, you should now know how to reset the oil light on your Ford Escape with ease. Always refer to your vehicle's manual for specific instructions and maintenance schedules tailored to your model.

AD