how to replace wiper linkage

How to Replace Wiper Linkage: Step-by-Step Guide

By Richard Taylor
AD

Is your car's wiper failing to clear the windshield as effectively as it used to? The culprit might be a worn-out wiper linkage. Fortunately, replacing this component is a achievable task that can save you a trip to the mechanic and a considerable amount of money. Let's guide you through the process of replacing your wiper linkage step by step.

Before we delve into the process, ensure you have the right tools and materials. You'll need a new wiper linkage, a 10 mm socket wrench, a flathead screwdriver, and a pair of pliers. Additionally, it's crucial to set aside some time, as this process can take up to an hour, depending on your vehicle's make and model.

Preparation and Accessing the Wiper Linkage

The first step is to prepare your vehicle. Park it in a well-lit, flat area, and ensure the emergency brake is engaged. If possible, use a jack to lift the vehicle slightly. This will give you better access to the underside of the hood.

AD
How To Re & Re the wiper linkage
How To Re & Re the wiper linkage
Replace Windshield Wipers with This Super Easy Guide
Replace Windshield Wipers with This Super Easy Guide
New installation video on our YouTube channel!
New installation video on our YouTube channel!

Once you're under the hood, locate the wiper motor. It's typically a black or gray box near the bottom of the windshield. You should see a large arm connected to the motor, which is the wiper linkage. Before proceeding, consult your vehicle's repair manual for exact details, as the location may vary slightly among different makes and models.

Removing the Old Wiper Linkage

Begin by disconnecting the wiper arm from the linkage. This typically involves unfastening a nut with your 10 mm socket wrench. You may need to use a flathead screwdriver to pry the nut loose if it's stubborn. Once the nut is off, gently pull the wiper arm away from the linkage.

New installation video on our YouTube channel!
New installation video on our YouTube channel!
a man is opening the door of a car with a pair of pliers in his hand
a man is opening the door of a car with a pair of pliers in his hand

Next, disconnect the electrical connector at the base of the wiper motor. This will keep the motor from receiving power while you're working on it. Sometimes, this connector may be hidden under a plastic cover, which you'll need to remove.

Disassembling the Wiper Assembly

Now that the electrical connector is disconnected, it's time to remove the wiper assembly. Look for a bolt attaching the wiper motor to the supporting bracket. Using your 10 mm socket wrench, loosen and remove this bolt. You may need to use some force to break the bolt free if it's rusted or worn.

AD

With the bolt removed, the wiper motor should be free from the bracket. Gently pull the motor out of the windshield area, accompanied by the wiper arm. If the arm is still connected to the linkage, use pliers to carefully bend the arm's retaining clip and disconnect it. The wiper assembly should now be entirely disconnected from the vehicle.

Installing the New Wiper Linkage

With the old wiper assembly removed, it's time to install the new one. Kits typically come with a new wiper motor, linkage, and arm. Start by installing the new wiper motor. Position it in the location where the old motor was, ensuring it aligns correctly with the supporting bracket.

Reattach the wiper motor to the bracket using the bolt you removed earlier. Tighten the bolt securely, but be careful not to overtighten it. Next, reconnect the electrical connector at the base of the wiper motor. Ensure it's firmly attached and there are no loose wires.

AD

Reattaching the Wiper Arm

The next step is to reattach the wiper arm to the new linkage. Ensure the arm is facing the correct direction and aligns with the linkage. Slip the arm onto the linkage and loosely secure it in place with the nut.

Using your 10 mm socket wrench, tighten the nut until the wiper arm is securely attached to the linkage. Be careful not to overtighten it, as this can damage the linkage or cause the wipers to malfunction. Once the nut is tightened, adjust the wiper arm's position if necessary to ensure it's correctly aligned with the windshield.

Testing the New Wiper Linkage

Before returning your vehicle to the road, it's crucial to test the new wiper linkage to ensure it's working correctly. Turn your car's ignition to the 'ON' position but don't start the engine. Operate the wiper controls and observe the new wiper arm. It should move smoothly across the windshield without any hesitation or unusual noises.

AD

If the wiper works correctly, turn off your car and let the excitement of a job well done sink in. However, if you notice any issues, double-check that everything is assembled correctly and not obstructing the wiper's path. If the problem persists, consult a professional mechanic.

Congratulations! You've successfully replaced your vehicle's wiper linkage. Regularly inspecting and maintaining your wiper system will ensure your safety on the road and extend the lifespan of your wipers. Don't forget to keep your vehicle's repair manual handy for future reference. Happy driving!

AD